Search results

  1. D

    Preparing a floor for sheet vinyl

    Would appreciate guidance on a subject I know little about... I intend to have sheet vinyl laid over both new and existing floors. The new floor, which abuts the old, is floating concrete screed (should be sufficiently dry by end December). The old floor was sheet vinyl (now removed) over...
  2. D

    Screeded floors - OK to use the rooms after it's set?

    Would be grateful for your views on using rooms that have recently been screeded (to 100mm depth laid on 100mm insulation with damp proof course beneath). I know that the screed should not be walked on for the first few days and that's not a problem. I also understand the need to wait several...
  3. D

    Scratches on window pane - am I being unreasonable?

    Fortunately, only one company involved. Yes, I'll raise the issue with them. Thanks for the info from the GGF website, crank39 - most helpful as I have more units due to be fitted soon. Currently, on one pane, there's a 6mm long scratch which I wouldn't class as fine, more moderately deep. On...
  4. D

    Scratches on window pane - am I being unreasonable?

    Had a few 30 year old double glazed windows replaced on Friday with new equivalents and today, whilst cleaning them, I've noticed small scratches on the inner panes of some of the new windows. Difficult for me to explain the severity of the scratches in words but one is deep-ish and 1cm long and...
  5. D

    rsj - preventing thermal bridge

    Would really like to hear the outcome, John D v2.0, as I'm facing a similar issue.
  6. D

    Low-level WC pan with 'P' trap or 'horizontal outlet'?

    Thanks for your reply. No, I can see the difference between 'S' trap and the others. Just didn't see the point in the 'P' trap as it's so similar to (though it seems far less widely used than) a horizontal outlet.
  7. D

    Low-level WC pan with 'P' trap or 'horizontal outlet'?

    Would someone kindly explain the difference in usage between each type (i.e. in what situation would each type be employed)? Thanks.
  8. D

    Fire Doors in a detached bungalow?

    I intend to. Just wanted to brush up on any relevant regs. before having the discussion. Forewarned is forearmed and all that.
  9. D

    Fire Doors in a detached bungalow?

    Would appreciate an experienced or knowledgeable view on this topic... In a detached bungalow, single occupancy dwelling with no attached workshop or garage and without the need for cavity barriers, do the building regs. require me to fit any internal fire-doors in a kitchen/diner + utility...
  10. D

    Position of Fire Doors within new extension

    Would appreciate an experienced or knowledgeable view on this topic... In a detached bungalow, single occupancy dwelling with no attached workshop or garage and without the need for cavity barriers, do the building regs. require me to fit any internal fire-doors in a kitchen/diner + utility...
  11. D

    Gap beneath a gas hob

    I guess the choice is between a 130mm deep non-ventilated space and a 2 or 3cm deep ventilated slot courtesy of vent holes in the front top edge of the cabinet. I'll discuss with the Gas Safe installer. I can also conduct tests with thermocouple temperature detectors and see which option keeps...
  12. D

    Gap beneath a gas hob

    Managed to find a heat shield/deflector/protector: http://www.ikea.com/gb/en/doc/assembly_instructions/nyttig__aa-725432-3_pub.pdf http://www.ikea.com/gb/en/products/appliances/hobs/nyttig-hob-separator-for-drawer-art-10243296/ The gap between the bottom of the hob and the heat shield is...
  13. D

    Gap beneath a gas hob

    I've heard that a heat deflector plate - fitted just below the hob inside the kitchen unit underneath - could possibly be the answer and was hoping someone who had tried this would share their experience. Although I generally agree with following manufacturers installation instructions, I get...
  14. D

    Gap beneath a gas hob

    Lots written about leaving gaps above, behind and to the side of gas hobs fitted into a kitchen worktop but I was surprised to see a recommended gap of 130mm beneath one of the gas hobs I'm thinking of buying (unless I'm misinterpreting these instructions)...
  15. D

    LED flexible strip as main room lighting?

    Using the link helpfully provided by StephenStephen in an earlier post, it appears I require around 3500 - 4000 lumens to adequately light my kitchen but, as you say, perhaps around 2000 - 2500 lumens is more reasonable for just ambient lighting. Could go bright and add a dimmer. Agree. We...
  16. D

    LED flexible strip as main room lighting?

    Thanks for all your views, experiences, suggestions and useful links - much appreciated. Indeed, that's why I will choose a profile fitted with an opaque/frosted cover. Even then, I'm wondering if the intensity of the narrow strip source necessary to adequately illuminate an entire room might...
  17. D

    LED flexible strip as main room lighting?

    Would appreciate views or experiences on using flexible LED strip lighting as a room's main ceiling light. I thought it would be interesting to use LED strip lighting, usually marketed as under-cabinet kitchen lighting, to illuminate a kitchen. I intend to use two long strips encased in narrow...
  18. D

    Construction (Design & Management) Regulations 2015

    Agree. Probably well intentioned, although the cynic in me wonders if the legal 'experts' exerted some influence on the HSE for their own benefit. Wasn't long ago... http://www.telegraph.co.uk/news/2016/12/08/investigation-alleged-abuses-british-troops-iraq-could-end-lawyer/
  19. D

    Construction (Design & Management) Regulations 2015

    I should have been more precise. Yes, I was told it's the F10 form that is sent to HSE. I haven't looked into this as yet so I'm unaware of the details and I (wrongly, by the look of it) assumed form F10 was the H&S plan. I didn't want to investigate this issue any further unless I or the...
Back
Top