Search results

I was looking at this aerial http://www.trade-works.co.uk/aerials-for-tv-radio-c12/freeview-tv-aerials-c31/medium-gain-tv-aerials-c33/vision-32-element-uhf-high-gain-aerial-p6622. As for the area, we had a strong signal before but are surrounded by a few high trees. This is where we are as to...

Lucid you have been amazing. What aerial & masthead amplifier or signal booster would you fit?

Thanks Sureitsoff? Great find. I mucked up the links. I think Lucid was referring to this Labgear one. Labgear LDA2061LR 6 Way Distribution Amplifier - 4G Filtered Amp For TV/FM/DAB Signals For 6 TVs RED Compliant...

Would a masthead be better? Wolsey WFAV 622 LTE 6 Way Variable Gain Masthead Amplifier with Power Supply Kit - Black https://www.amazon.co.uk/dp/B00PKKTRBI/ref=cm_sw_r_awdo_navT_a_KSXZ7CS7ETX0MTZEQAWF

Thanks Lucid. I’m planning to use this aerial Labgear LAB450T Very High Gain TV Aerial , Silver / Black https://www.amazon.co.uk/dp/B00I7TUH7C/ref=cm_sw_r_cp_api_glt_i_9SXTVR40ST7GFQJPY9FB?_encoding=UTF8&psc=1 There is a double socket in the loft which is used to plug in a low energy light...

Hi, After our chimney got blown down on Friday I am planning to install a new aerial in the loft. Is it best to use a signal booster straight after the aerial or a masthead amplifier? This will need to feed five TVs...

That’s a complete diverter valve kit. I can’t remember for sure it should have everything you need

I agree it’s definitely time for a plumber. Just wanted guidance of what it might be so I have the confidence the plumber knows what he is doing. is it ok to use while I wait for a plumber?

3 weeks ago I drain the boiler and re-pressurised to 1 bar. This evening the boiler started to make banging noises when in the shower. The water went hot cold hot etc. The banging noises sound a bit like flapping, like a bad flat tire. I’m wondering whether the expansion vessel has popped. I...

Thanks Denso13. Does this mean the pressure vessel pressure is too high or low? I’ll check to see if it’s around 1 bar

Hi, Our boiler was losing pressure with water coming out of the pressure release valve pipe. I’ve replaced the pressure release valve but water is still coming out. With the heating on the pressure is 2.5 bar, water is clearly more than dripping out of the pipe. Is there something that needs...

Hi, When running the shower the boiler starts up ok warms the water then cuts out. The hot water light goes off. After about 5 seconds it comes back on & heats the water again but cuts off again after 10 seconds. This repeats throughout the shower. All but the last temperature lights come on...

Untitled by Adam75 posted 24 Jan 2014 at 8:52 PM Hi, I’d like to change this latch on an internal solid wood door but I don’t know what type this latch is to find a replacement. Does anyone know what this is called? thanks Adam

I took all the pipe work apart, no blockage everything seems fine. I figured it had to be the diverter valve as this did not look set in the right position. Replaced this for £25 but no luck. The new diverter valve position doesn't change position. For now I've put the diverter valve in to the...

I’ve taken the dishwasher out today and had a good look. Not signs of a leak anywhere. Tried running the dishwasher with the bottom arm removed and the fill to the lower arm blocked. Still didn’t work. I can only think the pump has lost its pressure or something?! £70 on a new pump that...

Thanks Harry. The bottom arm spins fine and everything cleans well on the bottom rack. I've checked for blockages in the upper arm, its looks good. Water does come out of the top rack arm but like a very weak fountain. Not enough to spin the arm round. There is also a 3rd arm on the...

Adding more water to the bottom during a rinse cycle didn’t help!!

posting the above generated a link to some more posts, will give this a go.... Further research suggests it could be the inlet valve that is faulty. A suggested test is to wait until the water has supposedly filled and then open the door and pour extra in to see if that forces the required...

Hi, Our Beko DW663 top rack is not cleaning properly as the top arm does not always spin. I've cleaned all the filters at the bottom of the dishwasher, cleaned the arm, checked the pipes going to the top rack for blockages and ensured the top rack connecter to the top pipes securely. I've...

Hi I have quite a few loose patio slaps I need to reset before laying new patio jointing compound. The base is a mixture of concrete and sand. I’ve started to dig out the old mortar on 3 slaps with mixed results. Under 1 slab all the concrete sand mix came out easily almost down to the...