Search results

Hi, Just bought a house with a tiny tiny almost pointless hallway. I would like to knock the wall down to remove the hallway but I was surprised to find breeze blocks behind the plasterboard when i cut a small hole. Can anyone advise if they think this is a supporting wall? Wall to be...

Wall3

Hi, Can you get push fit fittings for 8mm microbore? Also is it difficult to work with, how do you cut or bend it? How can I even be sure it is 8mm and not 10mm! Its a 1980 house :) Thanks

Hi, They won't work though will they as there isn't enough room at the back of the toilets to accommodate the pipework which goes horizontal?

Hi, I have 3 toilets with large boxed in pipes running behind. The box sticks out about 200mm. Is there a close coupled style toilet on the market that would fit? I really don't fancy building a box at the back of the toilet - think it looks messy. WP_20170922_13_33_53_Pro by SkipFeeney...

Toilet3

Toilet2

Toilet1

Its 4 bar static. Originally when we first had the problem after it had been installed the engineer moved the dishwasher forward out of the cabinet and it worked a lot better. We thought it was because the water connection was directly under the dishwasher so the supply pipe was tightly...

Would you say its the dishwasher then or could it still be something on the supply side?

Hi, We have an ongoing issue with our Dishwasher and the engineers seem to think it is our plumbing. We are regularly getting an error - E2 - Water Inlet Malfunction Error. We always make sure we don't run taps when the Dishwasher is on, but still in about 30% of times we get this error...

Hi, I had a tiled floor laid in my kitchen last year in April. Its started to crack in a line and I removed the kitchen plinth and realised its where the join is between 2 plywood sheets. I used 18mm marine ply screwed into the joists and floorboards..but looking back at some photos I have...

Hi All, I have some plinth lights with the following 12v Transformer with a plug on the end. http://www.ebay.co.uk/itm/281333372117?_trksid=p2060353.m2749.l2649&var=580368379981&ssPageName=STRK%3AMEBIDX%3AIT My Electrictian has put in a FCU on the wall from the ring main with a trailing...

Hi, I have recently had a new kitchen fitted and a dishwasher for the first time. The dishwasher didn't work and always displayed error "E2 - Water Inlet Malfunction" during a cycle. So I called Argos out, and the engineer believed it was the hose connection to the dishwasher, not the...

Inlet_Hose

Hi, The supply pipe for our dishwasher is 30cm away from the the dishwasher. Currently having issues with the standard inlet hose kinking and causing water inlet errors. I can't seem to find a short hose - can i use something else such as braided hose? Where can i get one with female on...

Hi, I am preparing my kitchen floor (18mm Plywood for tiling) ready for the kitchen to be fitted. I need to work out where the Plinth will come to roughly as I don't want the plywood going beyond the plinth. This is on the island, which has back to back cabinets of 60cm and 30cm. See plan...