Search results

I agree. Hence why asking which reputable brands and online stores to purchase from.

16x2.0mm pipes Any suggestions to where to order online? I am getting a wilo pump, mixing valves and 12 port (unbranded) manifold for just under £400.

16mm... not sure of the brand. Will have to dig info out.

I require a 12 port manifold, pump and mixing valve. Is there any particular brand I should be looking at? Wilo? Grundfos? Any online sites which have reasonable priced items? Thank you

I had a word with the screed and UFH installer earlier.. I have decided to plumb in the UFH so will be a bit of work for a.temp setup just to get the UFH commissioned... but gives peace of mind before laying the tiles. Thanks again

UFH pipes were installed using a reputable company. In general the chances of UFH pipes leaking are very low. There are no joins in pipe work either. Taking the leak scenario out of it. I am happy to take that risk. It is just the fact its never been heated up which concerns me.

Thanks both. Chibs, What adhesive did you use for the ditra? was it same for the tiles? I am looking at using Tilemaster Setaflex Standard Set S1 Adhesive for both. I may use Tilemaster Anhyfix for the Ditra though. I may ask the next question on another thread as its slightly off topic...

Liquid screed floor poured just under a year ago. It is due to get sanded tomorrow. Which primer should i use to seal the floor? Can i use SBR/WATER mix? 1:3 ratio? or is it bestto use a acrylic primer...

Any opinion's, please?

I have walls on a basement that need finishing. Walls are internal and built up with thermalite blocks. I have to come in each side approx 25mm to level up with the stair case. 2 options Sand and cement, then skim Attach thin stud work to walls, plasterboard board over, and then skim Which...

Hi Robin Interesting. No primer, straight on to the floor as it is? The floor feels a bit sandy/dusty. Would the adhesive stick? Tiles are 1200x600 Room area is approx 50m2 What size trowel would you suggest?

Liquid screed was poured nearly 12 months back. Floor has wet UFH installed. Floor is level. Questions; Will I need to apply a primer as floor is porous in current state. i have read that liquid screed floors need to be sanded, however i have been working in the room for past 12 months so...

That's fine. Many thanks for your input.

I've got a new phone, hence the spelling mistakes The wiring is loose, clipped into concrete beams (block and beam).

Thanks for the details. There are no junctions boxes. Currebtly the live goes to the ceiling, here it connects to switch wire which loops back to the down light. The returning switch wire to the light is labelled as a live switch.

Thanks both. So, If i forfeited the dimmer switch and replaced with a rocker type, on/off. Connected Sonoff mini to before switch This would allow simple on off of the lights via switch and wifi control. In addition it will allow dimming capability via WiFi but not by switch as it would have...

Query about Sonoff and if i am thinking correctly on how these work. I have x6 LED reccessed ceiling lights 7W Operating Voltage: AC 220-240 Volts Wiring is the 3 plate/loop system. Lights are connected to a dimmer switch. My plan is to install a mini sonoff at the first light. This will...

Bar, lounge/tv , with partion of office and toilet area

Has any one had any experience with epoxy resin? I am leaning towards resin for by basement floor - approx 60m2. Quotes I have been getting are around the £120m2 price which seems v expensive. Looking to give it a go myself so if any one has any tips and guides it would be greatly appreciated.

Dehumidifier Extractor fans Opening windows Applying anti condensation paint Thing is, if I didn't do the stud work and insulation, then the walls would have been warmer, and less condensation!