Search results

Just for backup to be fair.

Yes is running 2.5 off a 16amp MCB. So I'll just replace the 2 switches and probably fit a new piece of immersion cable to be sure. Thanks for the help. Much appreciated. Mike.

Yes it's running off a 16amp fuse. So would you just fit 2 DP switches in the current switch locations because I don't think the existing cable to the first switch will be long enough to pull through to the consumer unit. Out of interest what size cable should be running for an immersion...

Need a quick bit of help if possible. I'm lookimg at fitting a couple of new fused switches to the immersion heater feed. Currently I have the switch on picture 1 next to the consumer unit which is fed from an MCB. Then the line goes upstairs to the airing cupboard with the switch in picture...

Thanks. Is it worth going for a vinyl matt due to using on walls. I have no experience of vinyl matt. Is it more like silk or alot less of a sheen. Thanks.

What's people's recommendation for a nice white emulsion for walls and ceiling. Just want a decent product which doesn't cost the earth but will cover well and not look too shiny. Most people say to go with a trace paint. Thanks.

U got a link by any chance to what polythene would be best .Thanks .

No unfortunately not

Membrane is knackered and doesn't flush properly .

Hi there. I have an old Purple Dudley Turbo 44 Syphon in my toilet, I know these are obsolete and have been replaced with the orange Turbo 44 Syphon. Am I able to fit either a Turbo 44 or Turbo 88 syphon to my existing down pipe in the cistern. My old Purple 44 Syphon has the yellow plug to...

Yeah it's tricky. I. Can see that both switches have a cable with only the live which goes to COM. I'm guessing that those are cables 4 and 5. Does that help at all. Thanks for your help.

Pictures attached. On the double switch the one closest is for the utility. The other side is the light which cable 3 connects to at front of house. And yes the utility lights were daisy chained from the first off Cable 6.

They are indeed yes. Front light and switch and kitchen light and switch work fine. Cable 6 is the one going to the light which is out of shot on the picture.

So, I decided to take down the ridiculous amount of strip lights on the ceiling of my utility ready to decorate, unfortunately I've now made it so both light switches have no effect. I have 5 wires coming from the ceiling but am struggling to get it back running. Cable 1 (live,neutral, earth) -...

Greenstar Ri 24 Yeah tank in loft Thanks

Ahh I get you It's a Worcester bosch gravity open system. I can't remember the model bits it's 24kw I believe.

3 port value and head has just been charged so that's all good now. If the 15-50 / 65 is OK then I'll just wack one of those on. Sorry what do you mean about the back casing. Thanks.

Thank you very much. Would you go for anything more powerful with the system so big. Flow to the rads is currently not great, or will the one suggested be suitable. The system has been extended twice with a 2 story extention and conservatory also, I think this is half the problem. Thank you.

Currently have a Grundfos UPS 15 50 130 and I think it's on the way out. I have a large 6 bedroom detached house on a Y Plan system with 19 rads. Is the current pump underpowered and what do you suggest as a replacement. I want to yet something with a bit of power as the system is pretty big...

Hi. Thanks for the reply. There is a magnetic filter fitted which I have cleaned out a couple of times since. The water was fairly dirty when draining. The pins are not sticking on the rads which are not getting heat so I'm confused to what next. The pump appears to be running properly but am...