Search results

Sorry seco, :oops: what do you mean by nip it up exactly?

Thanks for the response :) It is a stainless steel one and the immersion doesn't look too well in there so hopefully it should come out without too much trouble. When I refill the cylinder do I need to watch out for anything in particular or will it just refill itself until its full?

Hi. The top immersion heater on the unvented cylinder is leaking slightly. It's surrounded by limescale as we are in a very hard water area. it's a brand new fitted flat and apparently this problem has occured in other flats and refitting the heater has solved the problem as it has...

Thanks to both of you for your assurances. It does clear from bottom up and leaves nothing in the water so I am sure it is just air bubbles. I was just worried I had done something that needed fixing but if it's harmless and not a problem then I'll have a mince pie and a brandy and forget all...

Over the past few days the water from all our cold taps has started running cloudy. Things of note: It used to run cloudy just after you turned the tap on and then ran clear a few seconds after. About two weeks ago a plumber changed the cold water over in our flat from tank fed to...

I will bail out all the water first and see what I can make out down there. :D Thanks for your help.

Thanks seco. I couldn't really see under all the water but it looked almost like there was something reflective down there? Do the keys ever have covers on or anything like that? Thanks once again. :)

Hi. I need to turn the water off to my property. outside all of the properties on the street is a small manhole cover with Saunders Water written on it which I assume is the external mains stop tap. :? When I prize this cover off there is what I would expect - a 7 or 8 inch diameter pipe...