Search results

Yes I have seen these advertised as like your self on a vidi demo in an electrical shop :shock: :shock:

Where I am not a "super dooper glazier" and on occasions crck the glass especialy there there is a nail to my siurpize...

Because the whole frame needs re-painting and the putty has cracks in it

Hi, Can anyone recommend the best way to get old window putty out of windows? I am currently heating it up with a heat gun a bit at a time then carefully chiselling it out with a flat screw driver. As for the paint yes again I am heating it up with the heat gun then scraping it off with a...

And would it be possible to buy one which will also feed sentral heating? I take it I would be looking at an in-direct cylinder thow!

Will that do away with the Header tank and will it make the hot water pressurised? Thanks Richard

Can anyone recomend a good unvented (under sink) water heater to feed 1 kichen sink tap, 1 bathroom sink tap and bath. I caln't see the pipe run being any longer than 4 meter. Thanks, Richard

Hi all, is there any water regs on kids urinals? and if so what is the Maximum hight? both water regs number and hight would be apriciated, as the landlord of my local has the problems in the kids room toilets of young kids not been able to reech the urinal, There 4 there urine going all over...

and does it cost to inform building controll? or for them to come out ect??

Is it true you now have to have a certificate to fit UPVC windows and doors? I heard that you have to do a day course alternatively call out the building inspector to inspect afterwards!! is it true? Thanks Rich

What a good idea!! odviously cut it in to the floorboards with a stilsaw!! Would it be an idea to use Aqua board?? As for the crome no joints are exposed, Any commpression will either be the tap connector, and ball valves.. I was told by a plumber to heat the pipe not the fitting! That...

Im about to undertake my first plumbing job, and going to use crome pipe. When soldering do you have to clean the crome off down to the copper or is it ok just to clean the crome if you know what i mean? Also Im going to install a shower tray (no legs) go the floor but the floor is wood...

Hi, Im thinking of buying a combination cylinder to supply my chalet (in Mablethorpe) with hot water, ie Cold (mains pressure) straight to the tank, with a feed then from the outlet of the cylinder to the taps it will feed bath, kichen sink, and a small wash hand basin. What size (type)...