Search results

Hi, My Bosch WTA 2000 Vented Tumble Dryer has decided not to dry the clothes and have noticed that there isn't any heat so can only assume this is whats causing the problem. I've searched a couple of forums and most are of the opinion thats its one of the thermostats. The question I have is...

Thanks for the response Any other suggestions please

Guys, After some advice from the experts... Rather then painting the cellar walls I was thinking of using plastic cladding. Plan is to PVA the walls and then nail cladding into timbers (2x1) fixed to the wall. Its quite dry in the cellar not much damp and good ventialtion. Was also...

Hi, Rather then painting the walls I was thinking of using plastic cladding. Plan is to PVA the walls and then nail cladding into timber fixed to the wall. Its quite dry in the cellar not much damp. Was also planning to lay some Visqueen DPM and then lino on top. How does this sound? What...

Hi, Does anyone know where I can get the manual for the Cannon chester cooker. In not sure how to set the clock and the bottom oven doesnt seem to work but think its due to the clock being in auto mode which needs reverting to manual. Again any instructions would be greatly appreciated...

Hi, Yes it seems as though the walls have been painted before but not the floor. Most of the floor is dry apart from one corner which seems slightly damp. I only wanted to tidy it up and dont have a real use for the cellar. Regards

Hi, Thanks for the response. It is a little damp on both walls and floor and I dont have any window so verntialtion would be a problem. Would ordinary masonay paint suffice?

Hi, Hope someone can share some advice, Im thinking of painting my Cellar Walls and Floor but wasnt sure what type of paint to use. The walls seemed to be have been painted in the past and are quire rough. The floor is clean and never been painted. Any advice on type of paint and paint...

Hi, The problem has been resolved by replacing the APS Regards

The divertor valve was changed approximately 1 month ago. # The same problem is also seen when CH is turned on

There are lots of posts on here which have been submitted by no CORGI registered people but have been answered....All im after is in indication as to whether the problem may be with the APS or PCB. If the APS was faulty would the bioler not light the gas at all

Yes appreciate where you are coming from but from the symptons mentioned someone might be able to indicate where the problem may lie.

Hi, Thanks for the reply. I havent had anyone round at the moment becuase I wanted to get an idea of where the problem may lie hence put the question on the forum.

Hi, If the APS was faulty would the boiler not fire/ignite at all or could it still fire up intermittently? Thanks in advance

My boiler pilot light goes off and on intermittently. The fan seems to stay on but the pilot light doesn't. You can sometimes hear the boiler re-igniting several times before it either stays off or stays on and then you can sometimes hear it re-igniting over the operation period. It is...

Its slightly tilted back yet a bit of water does still come out of of it. I think i'll have it cut to its closer to the wall to prevent the car from being damaged. Another question, I have had a new mixer tap fitted in the kitchen, However I dont get hot water at times and have noticed that...

There in at least a meter between the flue and gutter so cant see that being a problem. The problem with it being so long is that hot water from the flue falls on the car which is parked in the drive. By cutting is shorter any water would hit the wall and not come down as much

I know why its been done! but wanted to know how it should have been done with regards to any guidelines

Hi, Thanks for the responses. Its a flue for a Baxi Combi 105 HE. It was purchased and fitted without any cutting/shortening. Should it be cut down so that the ridge is nearer the wall? Also, are there anu guidelines as to how many mm it should stick out from the wall Regards

Sorry forgot to mention that it points towards my driveway but seems a little long in my opinion