Search results

The only loading to the frame is from it own flat roof. The upvc units sit on the brick skirt/foundation so do not impose a loading on the frame.

I am looking to extend to the rear of a brick garage. Rather than use polycarbonate roofing (which may be easier) I am considering using a timber frame to support the flat roof, so the roof area can be insulated. The framing will need to support the weight of the flat roof. I can...

Hi, I am looking to build a small conservatory (3x3) in a corner (i.e 2 sides glass, 2 brick) of a single storey building. I would prefer to use a insulated roof, rather than polycarb. A standard conservatory would be easy (self supporting roof), but I suspect that the upvc frame cannot...

I could extended the existing garage roof (flat felt), over the new conservatory, but I cannot get my head around how the roof would be supported, as upvc is not load bearing. Does a timber frame need to be constructed to support the roof, with upvc as infill. A standard "plastic" roof is self...

I have a brick built garage, which I have come up with an idea to extend to the rear. Rather than a brick extension, I am considering adding a timber frame extension (approx 2m to the rear side), with a flat roof. Are there any plans online, as a starting point? i.e what size framing is...

I am looking to put a small 3x3 conservatory/sunroom onto the back of a single storey garage. I would prefer an insulated solid roof, as this will make the space more usable throughout the year. If a standard polycarb roof is fitted, what is the best way to insulate? Some companys offer this...

After a couple of years thinking about adding a conservatory, I think I have finally worked where to put it! Part of the plan is to convert the back of the garage to an utility room. The wall is single skin brick, with uninsulated flat roof, and concrete floor. What is the thinnest...

Howdens do not supply worktops longer than 3m. Does anywhere know where I can get a 616wide worktop in a 4m length (38mm laminate / black matte), otherwise it looks like the units need cutting down!!

What are others preferences for fixing upvc windows. Previously I have used concrete screws straight through the frame, but have come across nylon fixing screws as an option. Has anyone tried these? http://www.jcpfixings.co.uk/jcp%20data%20sheets/Window%20Frame%20Anchor.pdf

I refer to the Ideal Independent (logic) rated at 33.7kw gross (30.4 nett) The working pressure at the meter is 21mbar, and at the test point on the boiler 18mbar I have gas rated the boiler and obtained a measurement of 2.91m3/hr. The MI show a gas rate of 3.13m3/hr (based on a cv of...

yes.

On a ideal logic boiler, as far as I know there is only one test point for gas pressure on the incoming isolation valve/integral testpoint. Operating pressure is showing as 18mbar which seems a little low. The manual states that The external gas cock could further reduce the operating...

Hi Can anyone recommend a competative online supplier for a 4m laminate worktop, which can be precut with a 90 deg join?

Does anyone know where the cheapest place is to buy coving? Just looking for about 80metres of standand supercove paper covered type, Cheapest I have seen is at B&Q for Supercove Lightweight Coving White (L)300 x (D)10.5 x (Dia)11.5cm Pack Of 6, for £20.98. Does anyone know of any...

Is all in ballast ok for a concrete floor. The floor is being raised in a hallway. Part is being raised by 130mm to bring it to level with the rest of the hall, then a 50mm layer is required over the entire area. Is ballast ok for this (trowelled to smooth).

I have a hall floor that has sunken in areas. It appears that the original floor was filled with building rubble, topped with sand and the a quarry tile on top. I am looking to remove the top layer and replace with concrete. Whilst at it I might as well consider putting in a insulated...

Thanks all for your responses. Looking into fitting lintels now. The upstairs windows have the same construction, but on top of the soldier course is a tiled overhand, and then two more courses of brick before the roof plate. As there is less brick above the upstairs windows, are...

I have the plaster off on the inside. there are full header above the window (no lintel)

Looking to replace windows in a 1920/1930 house from wood to upvc Construction is solid wall (220mm) and is built with a header course above windows (i.e no lintel) Can a upvc window be fitted as a replacement without further reinforcement. Or is a lintel required to be fitted, unless...