Search results

Hmm - interesting point. What would need to be done to strengthen things ? [ Also I've now decided on 2.5 bricks each "width", so 50cm x 50cm (as opposed to 43x43). The construction is "typical" brick and block cavity wall, i.e. brick outer, aircrete block inner (with cavity) ]

I have a single storey, 3.6 m x 3.6 m outbuidling, with 10 , 4x2 joists running north / south. I am looking to install two large (identical) sliding french windows in the north and east walls (i.e. - corner orientation, not on opposite walls). I will put a lintel under the (north) load bearing...

Hi guys I am attempting to replace my old Honeywell rotary wall thermostat with a newly purchased Horstmann one. My problem is I don't know which wires go where, so I've tried to show the "old" wiring (together with diagram), and the new wiring. OLD WIRING: The photo above shows...

Awesome - it worked, thanks for the help. One point (not sure if I should try and post this in an "Advice" section) but the RWB29 requires you to set dip switches for Daily, 5-2, or 7 day programming. No problem thre, HOWEVER the unit only recognised the current dip settings AFTER you press...

Hi , Came across the following image of a "Potterton Miniminder" and visually it's exactly the same as mine (apart from mine says "Landis and Gyr" on the bottom left, and has a dark brown fascia plate, however - the actual time clock "wheel" and two stwitches are identical: (Hope you guys...

Hi bhm1712 Had a look on the front - no model number at all. Will it be safe for me to undo the "front" and have a look ? (I guess the model number MUSt be under the face plate of something ?) Thanks v m Mark

Thanks for the advice. I'll look at those sources. Mark

Hi Guys I have a very old "Landis & Gyr" mechanical Central Heating / Hot Water controller in the airing cupboard, which controls the central heating and hot water, in terms of when they come on, and turn off. It's become tempremental #(and getting worse), so I think it's high time I...