Search results

Thanks. Is there another name for this.. I can't find it in the service manual? Thanks again

which is the best kit to buy to repair this.. they all seem to have different numbers of washer/seals for example looking at this 3 packs https://www.ebay.co.uk/itm/Baxi-Combi-80E-105E-105HE-Diverter-Valve-Repair-Kit-248061RK-248061-248062/231734562535...

Do I need to service the DHW Pressure differential valve diaphragm, CH Pressure differential valve diaphragm and diverter valve operating head as shown in the pdf attached? Thank you

Thanks so i can try repair it with a kit like "Diverter Valve Repair Kit 248061 248062"?

I have a Baxi Combi 80E boiler, the heating seems to come on now when I use the hot water even though the heating is switched off. What can be using this I have seen on youtube it could be the motorised valve/3 port valve, is this the diverter valve on the baxi? Can it be repaired or it is...

That is exactly what i did do however it only worked for 2 washes then the softener water inlet stopped working (red light again). I managed to source a used miele triple water inlet off ebay and changed diaphragm on the prewash and softener inlet so far it has been working fine now for several...

That video was a great help thank you very much. Do you know if it possible to buy just the diaphragm part? Or would it just be easier just to buy a cheap whole triple water valve inlet from ebay and take the one of the diaphragm off that and use it on my fitted one? Thanks again for all your...

Great thanks for the video and your help. No need to dig out your valve. I will try fixing the value myself following the video guide. Thanks again

opps double post

I did swap the two solenoids on the existing valve.. the two Orange coloured ones. you can see the top one in the pic. you can see the top one in the pic with sticker on it with the one below it.

New miele triple water inlet value is £120.. got to decide whether to fix this old machine or bite the bullet and get a new washing machine.. Which would you go with?

Thank you.. do you know which is the presoak and which is the main wash solenoid? I swapped the two orange ones (the two that are next to each other) it made no difference

I spoke too early, it only seems to work if I have presoak on but stops after the presoak section and gives the water inlet flashing error again Is the Inlet valve for the mainwash part of the triple water inlet valve?

It seems to be working again, only did a empty quick wash. Will give it a try again tonight. Thanks again Richard

is that not part of the triple water inlet valve?

Thanks guys.. it is the first time i have come across these type of hose clips

Thanks, I will try that when I get home after work, if it starts normally what does that mean? What do i need to try need? Thanks again

A quick stupid question, how do you take off/loosen these types of hose clips without breaking or damaging them please? Thanks guys.

I have a Miele WT945 washer dryer, which has stopped working.When you put a wash cycle on, the water inlet/drain light flashes red. On a drain only cycle/setting it works fine, so drains water ok. Also if I put on a spin only cycle, it works fine. It seems that it is not taking in water...

The pipes going into the radiators are 10mm approx.. the pipes from the boiler as approx 20mm. Thanks for your help :)