Search results

no, the wall has been built against a garage =

Hi do i need planning for a conservatory? i am building on to an attached garage, the con is less than 70m3 and is more than 5 metres from the highway. any advice appreciated

Hi, any chance you can look at my new wall, it has been put in by the landscape gardeners and i reckon it is not very good, any chnace of trying to pitch an estimate to take down and rebuild the front wall?? http://i179.photobucket.com/albums/w289/m15not925/DSCF0320.jpg...

if i need to pop the red connector into thr recess of the ceiling due to lack of space, is it safe, and should i tapeup with insulatring tape?

dude, you have been a great help, many thanks indeed tomo (from the north by the way) :D :D :D

wot about the black??

ah, i think i get it...... the 2 reds go into a connector seperate to the new light kind of alone if you like. the yellow goes to live in the new light t block, blue goes to neutral in the new t block and earth to earth???

perhaps, i am getting terminoligy wrong, i basically have a new 3 spot light to replace the flouro light. the new light has a 3 way t block that requires LN&E only. The fact that the flouro light wiring is not a straight swap, and has more wires tan red black and earth has left me stumped.

no i dont, is the honest answer. i did the other light in the kitchen, but that was a straight swap with 3 core. the 4 core has confused me, as the new light only offers a LN&E block and the way i see it, there is a wire spare

artex does feel chalky and porus, yes its a kitchen, will recheck the piant spec, cheers

artex does feel chalky and porus, yes its a kitchen, will recheck the piant spec, cheers

pics attached http://i179.photobucket.com/albums/w289/m15not925/100_0099.jpg http://i179.photobucket.com/albums/w289/m15not925/100_0100.jpg

artex about 10 years old, certain its not been painted. the paint was a standard dulux matt emulsion. no probs with flaky area to my knowledge

Hey, applied mist (30% water to emulsion) coat to bare artex ceiling, most of the paint went on ok, but i have one patch about 2 ft square that just will not accept the thinned emulson. any clues as it is driving me nuts!!! :?

there a 4 conns on the flourescent light and only 3 on the new light???? :?

hi, i want to change an old flourescent light in the kitchen for a standard light fitting L-N-E. Thing is i amconfused by the existing wiring. There are two incoming cables a 4 core and 3 core, i am fine with the 3 core red (live) black (neutral) and the earth. The 4 core however makes...

just to complicate matters further, on the last service the loop was removed :? :? :? :? :?

hey folks, just bled the rads on the CH, problem is when i try and refill the system via the loop, nothing happens :? The pressure is currently at 0.5 bar, and the sytem requires a min of 1.0 bar. Help :cry:

Hey guys, whats the best twin shower pump in your opinion. I have an easiboost twin impellor, and nothing but aggro with it. Intersted to hear what type you guys recommend ( Pos head btw)

i just want to change the rad ( which is off) to a heated towel rail. I need to drain system so i can alter the pipework to suit the towel rail.