Search results

I am looking for some grass seed that is drought tolerant need quite a bit to cover 250m2 could anyone suggest some to get and how much i would need

Cheers bough some 7 inch ones, look pretty substantial

Looking to hang a couple of 5ft high x 190cm gates, but may in future put something bigger (field gate) what size posts should I use to future proof it, would 100mm x 100mm be ok or should I be looking at 7 x 7 inch wooden posts?

Thanks, I think watering will not be a problem at the moment.

I have 20 6ft bushy laurel to plant (pot grown) Is there anything i should add for roots when planting or should they be fine straight from the pot?

ok oil it is https://www.wood-finishes-direct.com/blog/interior-wooden-doors-top-tips-on-care-and-maintenance/ try on one first, obviously it will void any guarantee though

You mean "Osmo Door-Oil is a unique oil and wax combination designed to protect interior veneered wooden doors." So ignore door manufacturer saying "not suitable for treatment/finishing with any kind of oil, wax" No idea why though, I have loads of danish oil, sure i used that in last house on...

So use oil even though it says not to?

I want to keep colour, but door tech information says can't use oil. " Door requires finishing using a suitable paint, stain or varnish found in your local branch. These doors are not suitable for treatment/finishing with any kind of oil, wax or polish which will cause the oak veneer to...

Could someone suggest a good brand of light oak wood stain for interior oak veneer doors please?

Can you have more than one bell/strobe connected wireless one at front one at back of house?

I have a large concrete base ( was floor to old double garage) If i lay slabs over this am i best putting down wet mix or lay on sharp sand/cement dry base. Will it be ok to lay on a solid base like this rather than compacted hardcore? ( really don't want to dig it up)

Trying to decide between Howdens and Travis Perkins. Doors look the same although TP ones have extra lippage, regards quality, would both be similar? TP cheaper.

Is Entry 2 delay time the timer that Only effects"Entry Exit 2" so different entry can have different time?

If Timed Exit is set The area will arm after the programmed ‘Exit Time’ has expired. Do timers "Entry 1 Delay time" and Entry 2 delay time" refer respectively to zonez set as "Entry Exit 1" and Entry Exit 2"? So Front door can have shorter entry time than back door for example What is second...

Thanks, So if set to entry/exit rather than timed exit, the difference is you have to open/close door to activate rather than it be timed?

If I have two doors that can be used as entry/exit have I set it correctly, front door is Entry Exit 1 and back door is Entry Exit 2, both area A with timer set to Timed Access. The PIRs i walk passed are then (2 of them) set to Guard access as per last image?

The PIR that goes red is in the same room as I am working on controller (PIR 11 in picture), if i then get someone to walk passed other PIRs none go red with the ricochet monitor, but they do register on a walk test.

All help appreciated or guidance on best way to set up. Hopefully I am now somewhere close to it thanks to sparky

Ok so I have now set as image I basically have keypad in lounge, accessed via back door and lounge pir, or front door and stair pir Wintex auto fills that tick box entry exit 2 attribute