Search results

Thank you for all the replies, as well as that link to the Screwfix filler ... think I'll give that a shot. Regards ! :)

The electrician has put several new sockets in my house, having chopped out the internal breeze blocks first. New skirting boards were fitted, but there is a small gap, approx 10mm wide between the bottom of the socket and the top of the skirting board. This is the case with about 5 sockets...

What is the best product to stick down uPVC sills which are being fitted directly ontop of the existing timber sills? Is silicon the best or a no nail type mastic ? Secondly, what is fitted to the ends ? Are there special end pieces or isi It just acase of. Urging a setup of uPVC trim and...

I am in the process of decorating my house and will of course need some filler for the inevitable cracks, holes , dents in the plasterwork. I have always trusted the powdered Polyfilla, but was wondering whether the other, some much cheaper options are any better, or are they worse...

Hello What is the name of the waterproof panels, that can be used instead of wall tiles within a shower please. My existing tiling isn't looking too good and i was thinking about replacing them with panelling .. either instead of, or glued on to them if this is possible. Are there any...

We have a walk in wardrobe, which has an opening size of about 1100mm. A joiner cut down and fitted two normal internal doors a while ago, but the hinges have come loose. I think this is because there is too little wood on the hinge side to screw the hinges too (screwed end-on to the door...

thanks for your reply

Hi Just taken my mothert's old Echo Hostess Trolley from a spare garage and decided to try and use it. Found a suitable cable, plugged it in and all seemed OK. 10 minutes later, it is heating up without any problems, but another 5 miutes later, a power failure .. main board tripped...

Thanks for your replies Was surprised my s o d i t was changed though .. made me laugh !

I have an old Baxi Bermuda fire, with CH boiler behind. This was serviced approx 6 months ago. A few weeks ago, I noticed there was no hot water, so lit the boiler again. Because the hot water was obviously cold, the boiler started up and everything was fine. About 20 seconds later...

The garage was built before the ditch was dug .. has that any bearing on the situation? or I have just got smile and get on with it thanks

My elderly father bought an extra garage many years ago, which is not near to his house. The side wall seems to be moving, which I assume is due to subsidence. This would of course eventually lead to the roof joists pulling out and the roof collapsing. Obviously this needs to be sorted...

Hello i have found a site providing online builders rates, at this site. http://www.constructionrates.co.uk/ Does anybody know how up to date these prices are ? I want to work out a rough price for some work, before deciding on whether or not to proceed. Do the rates include a...

I wouldn't have thought so, as the garage is not near my fathers house and there would have been no way of knowing who owned it. Even if he had said yes (very very unlikely) ... what happens now that the wall needs to be rebuilt ? Is it simply a case of asking the lean to owner to remove...

My elderly father purchased a second garage many years ago, which iI am now clearing out etc. I notice the wall is moving, possibly due to due subsidence, so this will need replaced in the near future. While on the roof, I see there is a lean to greenhouse joined to the wall at the back...

My elderly father has a second garage which is no longer used. I am clearing it out now and will give the door a coat of paint. I am in a bit of a quandary though .. The garage is double width, with the up and over door about 3500mm wide. The door and the whole mechanism is really in...

The lower timbers on my garage door are a bit worn, so I think I could cover it with a small section of plywood, perhaps 600mm wide. As it is an up an over door I don't want to add much weight, so would 3.6mm thick plywood be OK ? or should i opt for 6mm ply. Would MDF do ? or is this no...

the long concrete driveway of my elderly father has joints, approx 20mm wide which seem to attract weeds etc. Is there a way to fill these ? I understand something would need to be flexible, to allow movement (as per the original design). Which product would be best ? Thanks