Search results

Dear All, I am trying to resolve an issue with an existing soakway in the front garden at my residential property in the UK. My property was constructed in around 1969 and the roof guttering runs along the fascias of the property and then flows into a vertical downpipe. The downpipe runs...

Thanks so much!

Dear All, I am trying to source a supplier of shower screen seals as I need to replace my existing shower screen seal as it is beginning to turn yellow. The existing shower screen rests on top of a bath and is sealed using a rubber seal. I have attached a photo. The thickness of the glass is...

Dear All, I have a garage which consists of an original garage and an extension that was built some years later. The facia board on the original garage is 20mm wood and I believe the facia board on the extension is 22mm bullnose facia board. I have attached some photographs. The paint on...

oh ok John, many thanks. Cheers

Thanks Chivers, I am having trouble with the dial(s) on the corner (which say 1 and 0)

All, Please see attached photos of a mechanical timer plug. Unfortunately I have no instructions and cannot identify the manufacturer. I would be very grateful if someone could provide guidance on how this plug is operated. Many thanks Paul

ah ha, I think that rings a bell Taylor, I believe the tiler may have mentioned Wedi

Thank you Taylor for giving your time and offering some help. I was asking here as I didn't want to disturb the tiler on Easter Sunday! Happy Easter to you too!

Dear All, My upstairs bathroom has electric underfloor heating that was installed under tiles. Before laying the underfloor heating the tiler installed some boards on top of the existing floorboards. I have attached a photo. I am sure these ligh green boards have some sort of insulating...

thaks guys appreciated

gents, thanks for your expertise, maybe im in the wrong. Ill do some sums and maybe I dont appreciate how everything adds up. yes John it 150W per metre and I have 30sqm so more like 4.5KW. i do have a HE gas boiler

see above John

I have electric UFH which is around 5kW on for 2 hours a day so certainly a large load. Theres not much more else on in the house to be honest

Thanks John, I appreciate your expertise, I do have underfloor heating, but before u gasp(!) I would appreciate an answer to the question about the wrong reading being set. A bit like I suppose someone fitting the wrong miles per hour or kilometers per hour card behind your car speedo!

nope no storage heaters. the pictures should be shown but there are three displays which are rotated by the cycle display button. These are:- Rate 1 (and then the units) Rate 8 (and then 88888888) t (and then the units)

Dear All, I have contacted my energy supplier as my property seems to be using around 36 units of electricity a day and I believe that considering the electrical items I have on that this is too high. My energy supplier have suggested I could have a faulty meter. My energy supplier have...

into the tap are hot and cold flexi pipes (supplied with the tap). I am beginnning to think that perhaps the rubber tube in the cold flexi may have got twisted?

thanks guys, Well I took the cartridge out of the tap (which didnt come out as a single cartridge basically the cartridge came apart). The cartridge looked OK however I tested the water with the cartridge out and the rate of flow from the hot was signifiantly quicker than the cold. This...

I assume an air bubble in the system would not contribute to this fault