Search results

Brush and wd40 didn't work unfortunately. Found this article which may be worth a try? https://polarclouds.co.uk/dt90e-repair/ The digital programmer is lit up And working fine just the room stat that's dead. Does that mean anything by way of electrics are fine?

How would I check this to rule it out?

Yes I believe its just 3 coloured wires from memory, can it be replaced with a manual one or best to do like for like

The stat is wired.. I tried two different types of batteries checking they are in the right way before inserting still blank and didn't go faint before disappearing that I am aware of. I'll try cleaning the terminals with brush and wd40 as you suggest and let you know if worked.

Hi All The screen has gone blank on our honeywell digital thermostat (pic attached), I've changed the batteries but nothing. Any ideas what it could be and if a replacement is required is it easy to replace? Many Thanks

Yes sorry guys I must of done that, just replicated a couple of times it s only the far right one {pic attached) Must be the post Covid issues I'm having Anyway binning the radiator. Thanks All Much Appreciated

All of these (attached) were down

I'm pretty sure I had to reset all of them including the big one as I heard various things coming on as I fired up each switch.

Yes all of them not just individual or just those related to upstairs etc

No have to unplug and reset circuit breakers

Yes power back on, plugged back in... Power cut again. Unplugged power back on

Hi All I have an oil radiator which was working fine no issues yesterday, today I plug it in and it causes a power cut in the house. It seems to go straight through, I would of expected it to blow the 13 amp fuse in the plug but it causes a power cut to everything in the house not just...

Cool thanks all much appreciated will look into flush valve

Thanks what should I plumber charge for that?

Picture attached as requested, not reaching overflow as I reduced water capacity to below the line in cistern.

Hi All I have a newer style Ideal Standard Toilet where the water is leaking into the pan. Sometimes the water trickles down quite a bit, sometimes it drips and sometime I struggle to see if it dripping. Seems to change after each flush. Leaks more often than not. Being on a water meter it...

I've noticed throughout the year that some days the water from our unvented cylinder is piping hot when we shower hence mix with cold, some days it is just warmish to the point we have to turn the shower setting to hot only (not a great shower feeling). Can anyone help me understand why this...

No nothing like that and no isolator valve on tap end, what would you say is the way forward? Turn off the cold water mains and just let the hot water run until it stops something like 250 litres?

Thanks yes it is unvented HW cylinder, so i have to turn the mains off and let the hot water run until the cylinder is empty ? Do you have a link to a stop tap i can't see anything on the pipes they just run constant without anything on them that I can see that would isolate the HW.

I don't seem to have a red gate cog next to the cylinder upstairs to isolate the hot water and change the hot water tap. I have a grey flexi pipe though with 2 black flaps, if I turn one of the flaps down will it stop the cold water refilling the cylinder and allow the cylinder to naturally...