Search results

Any idea how easy is to fit a new one

1/ yes 2/ I have a shower system not a bath. Once hot water is flowing in sink I know hot water will flow from shower (not sure how long will it last though) Another thing I will say is that few days back there was problem is the block people having water issue so water contractors came in and...

There is some water and one Person should be allright to have bath but water does not get replinished. Also in the shower to get hot water we have to open the sink tap for a while (after we turn pump on) turn to cold side first, then hot side. When we turn to hot side on sink takes minutes...

I think it's almost touching the wall of the tank, clearly not falling and touching the bottom. There is some water and one Person should be allright to have bath but water does not get replinished. Also in the shower to get hot water we have to open the sink tap for a while (after we turn...

Sorry where is the jet in the ballvalve. Problem is that water tank container is in very tight space as you can see from the picture. Will I have to take the container out first, install a new ball valve and then put back in place.

My water tank is not filling up and therefore no hot water which means no bath. This is only upstairs but in kitchen downstairs is fine. Attached are pictures of the tank. It's old building, pressure is long w anyway. There is shower with a pump installed to increase the pressure. We can have...

My water tank is not filling up and therefore no hot water which means no bath. This is only upstairs but in kitchen downstairs is fine. Attached are pictures of the tank. It's old building, pressure is long w anyway. There is shower with a pump installed to increase the pressure. We can have...

Thanks guys, all sorted problem not so much the pressure but the low gravity, low pressure water system that is causing water not be replenish fast. Pressure is low in my flat and its old system.

Yes I saw this sort under the boiler. Don't have to twist the black tabs together for few seconds or is there something else.

How to increase pressure to my Valliant ecoTec plus 615 wall mounted boiler pls. Pressure used to be 1.4 to 1.5 bar now showing 0.9. Much appreciated,

Oh come on I ain't no gangster but some these days may take that as complement. Blame the phone predictor text. Anyhow any guesses what the approx cost I am looking at to get my hot water running from taps again. Thanks.

Sorry that was a typo, happen when you do it from phone

The thing is what can be done about, brew, thanks for all of your replies so far.

No not really

Not at home so can't test it but don't think. I need to get the programmer fixed first and see. But I know before radiators were not getting hot for a fact

Bcz the inlet filter to boiler might be blocked.

Yes it did. When hot watt is on boiler kick starts, pilot light is on, pressure is about 1.5-1.4, only thing is I read somewhere the inlet filter to boiler needs changing.

It was on loose fitting but on and working. I tried to adjust it but came off and then I tried to put back with tape on edges to hold it against the wall but it has not turned on yet. Do you think it's the zone valve where the programmer is connected to the issue as water was not coming hot...

I have attached some pic. First of all from my research I now think issue may be with zone valve (see pic of it. I think that is zone valve) I also noticed my programmer to contro water and heating was loosely connected, in fact after few adjustments I knocked it off ( you can see the pic of it)...

I have a problem with no hot water cooler Ming from my taps and shower. I am only getting Cold water but no water from hot tap in flat. Other things I can tell you - boiler seems alright as water is heating up (can feel pipes hot),!pilot light is on when water is on, boiler pressure is 1.5 on...