Search results

Thanks, Ian . Would this be covered under the guarantee. The cylinder is 13 months old

Hi, I has this cylinder fitted a year ago in a flat with economy 7 heating on the tank. The tenant phoned me up today and it appears water has been coming out of the pressure relief valve, and as a result where it drains into 1 1.5 waste pipe, this has warped due to the heat of the discharge...

I have been told it is a septic tank, thanks all

Thanks for all your assistance

Thanks Nige

Thanks John

Hi, I have had the fire places on the ground and first floor of my house removed. Due to the neighbour on the other side having their's removed and using gallow brackets, in conjunction with building control a steel on my side was fitted to support the stack above the first floor. I now need to...

Hi, not sure if this is the right section. I am in the process of buying a house, which is an old farm cottage. There are 6 cottages, around the back it looks like there is some kind of sewage plant. There are two circular green plastic tops on the ground, a vent sticking up from the ground and...

Thanks for your help, the incoming water and gas pipes have 10mm earth bonding to the fuse box.

Hi, is bonding between hot and cold water pipes eg under a kitchen sink required if a 17th edition fuse box is fitted? Thanks[/i]

Great, thanks

Hi, I rent out a house. The dishwasher needs replacing. It is has a fused switch above the worktop and the cable from the dishwasher through a plate behind the dishwasher on the wall Can I legally wire up the new dishwasher, i.e cut the plug off and wire up into the plate? or do I have...

Started digging and found the leak by the boundary on the old pipe! All repaired and sorted

Hi, I have a flat built in the 1970s and just received a water bill of £3000. The water co. have been out and said it is a leak between the water meter on the pavement and my flat. The meter spins round at a rate of knots. I have had a quote to relay a new pipe but have discovered this...

great, thanks muggles

Thanks Muggles, so I would run a tap and monitor mains pressure at 1.5bar, then measure how many litres per minute come out of tap? what is ideal flow rate? Thanks

I have a 2 bedroom flat which has electric heating/electic hot water which is on economy 7. The hot water tank is 6ft high with a two elements heating it (night and day) and appears to have a smaller header coldwater tank built at the top of the tank which coldwater tops up the tank via a ball...

Thanks for all the advice

Yes, it was new rads , valves and new pipework. Thanks will look at that filter

Will find out and reply tomorrow