Search results

It is an unclear area, generally they deem 'professional person' someone who has a degree and is in a 'position of responsibility' So the egit who studied public media and cultural studies and now teaches PSHE in a school because that is about all they are capable of is deemed 'professional'...

cheers chaps, I had read that passage in the guide to PIR, but still did not feel it was saying it allowed me to disconnect. However I do have the sentiment of 'SOD IT' and turning off, this would leave the family with no sockets or shower and very few lights!! If I call the EHO how...

Took a sneak view at a rented property today, occupied by a couple and their 3 small children. Just for starters 1. No RCD protection to sockets or shower 2. shower supply undersize, MCB under rated 3. Down stairs lughts not working 4. 5 broken sockets hanging from walls, previously...

Is it me or is the solution fairly obvious here. assuming the socket is not already a spur!! Fit a FCU next to the socket, fuse down at 5A, 1.5mm up the wall from FCU to switch to Light fitting!!!

Pitch Tar leaking due to rise in temperature, does the fuse carrier feel hot? If so call the supplier

How goos is his knowledge of 16th? TBH there are not that many changes the one day course will probably be enough. He may be able to get funding, he needs to ask when he goes in next, as it would improve his chances of work then he may have a good case. Then again the CONDEM's have probably axed...

Worked with a plaster who "trained" with this lot recently. his work is rough at best, he has no consideration for other trades and does not look after his tools, will not be reccommending or using him until he 'gets a grip' and some seroius experience. Look go to your local college they...

If you really need blade cooling go and hire one that has this facility, as mentioned before you'll end up covered from head to toe in cack

Surface box and trunking 5mins :-) So how exactly have you drawn the cable up?

10mm on 45A

Well folks, was there yesterday whilst the kitchen fitters were putting the oven in. There was the handbook so opened it up. Manufacturer reccommends 6mm supply on a 45A MCB any thoughts anyone?!?!?.....

Is there RCD protection in the c.u.?, is the bonding and tails upto date?

http://www.swindon-massive.co.uk/electrical/revision/2360pt1/assessment_choices.html I used alot fom here, hope it is of use

cheers guys, don't worry TT, we all misread. Any way up date; DNO came and installed PME ( I could have easily done it!!). So going with 40A RCBO to main board and exporting the earth

Hi Chaps, currently re-wiring a house with an overhead supply and TT (well now there is). DNO are coming tomorrow to hopefully supply PME. Now would like peoples opinions on this part. There is a 16mm SWA to the out house 45m away, what I am trying to decide is whether to: 1) place...

blody thing had cleared this morning and now works fine

Thanks TT, there is a cpc will take another look today

installed some of these bloody things today, however when switched off 1 of them has a faint glow to it, any ideas what is causing it and what is the best solution

IIRC, you will need to tilt the washer backward and the 'pump' outlet is front right, very strong circlip release and drain into a bowl, have a good clean out of any old food etc , hoipe this helps

get a sparks...