Search results

  1. S

    Split BNC signal 6 ways?

    Current setup just had them connected together. I haven't yet opened the tape to see exactly what they did. Can you just twist around BNC cables to get a signal?
  2. S

    Split BNC signal 6 ways?

    It is BNC, if that makes sense?
  3. S

    Split BNC signal 6 ways?

    How does the DVR output it to 6 screens? I thought there is only one output port and the option are how many of the input signals to show on there.
  4. S

    Split BNC signal 6 ways?

    I have a front door camera and would like to feed the images to 4 screens around the house and to DVR. I thought that there would be a adapter that can do this, but at the moment I can only find max a 4 way splitter . I have found powered amps that can split more but these are powered. Is there...
  5. S

    Connect Wireless Texecom devices to power supply?

    I know sounds like paradox, but say I have cables run from alarm panel to location of where I would like ane extra PIR. Lets say I have run out of hardwired zones so I want to add the zone with Ricothet, can I use the alarm cable to power the device so I do not need to worry about flat batteries?
  6. S

    Texecom FW update and now...

    System defaulted after flash
  7. S

    Texecom FW update and now...

    have not yet installed any ricochet. At moment all hardwired
  8. S

    Texecom FW update and now...

    Hi, did a FW update to v4. I backed up all to Wintex and restored post update after restoring defaults. It seems like restore gone fine but the PIRs not registering in the walk test. What have I done wrong?
  9. S

    Texecom Flasher PCB

    mistake, admin please delete
  10. S

    Extended alarm cable not working

    Is there any ETA on micro shocks? Are they definitely in the pipeline?
  11. S

    Extended alarm cable not working

    So is there a correct way to do this without losing all the data? Where did you print the info from? Screen grabs?
  12. S

    Extended alarm cable not working

    I want to buy the PCB interface and usb com cable to bring fw up to date in anticipation of ricochet. I have current config backed up to Wintex. I am on version 2.11. As above, currently no ricochet. Is it simple process to update or will I need to reconfigure the devices after?
  13. S

    Extended alarm cable not working

    Ok, thanks so much. Ignore PM as answered here - hopefully help future generations. Decisions....
  14. S

    Extended alarm cable not working

    If I was in a very brave mood and prelabeled all the cables to remember where they go and I install and reconnect cables to the 48 would I be able to simply flash a my current config from the wintex file created with my current 24 panel or would all need reconfiguring? Currently all I really...
  15. S

    Extended alarm cable not working

    SO if I have 12 zones available in the panel and install a 32xp then I will only be able to use 12 of the 32 zones?
  16. S

    Extended alarm cable not working

    Yes 2 bell boxes
  17. S

    Extended alarm cable not working

    Just to make sure I haven't made a mistake in my description. Pic below is my panel. Is the network port available for the ricochet? Where is it?
  18. S

    Aiphone LEF intercom

    :D
  19. S

    Aiphone LEF intercom

    Thanks so much. Managed to wire as per your advice in star from junction box and all working.
  20. S

    Extended alarm cable not working

    And is it possible to connect straight to panel or does it need to be to a keypad. And why would the installer have assigned 4 zones to keypads?
Back
Top