Search results

Got called out to repair a leak in a solid floor, and noticed it was a one pipe system 22mm, the section of pipe i cut out had two 15mm centre tees that supplied the lounge rad and inbetween the tees the section of pipework about 100mm apart had some kind of internal reducer, and then carried...

I will be fitting a unvented cylinder soon, but the existing shower is a Trevi boost venturi. apart from changeing the shower head, will the cylinder be compatable with the shower, ive never come accross this shower before and any replys would be appriciated.

My son as recently passed his AM2 exam and has his NVQ qulifications and i was wondering whether he still needs part P, or is this coverd throuh his training, hes a little slow in up dateing me, and would appriciate any feed back. Many thanks.

I am a R.G.I and today after power flushing a very old system,i had problems starting the boiler. The boiler tries to fire but does not ignite, it then goes to lock out. It was working when i got their, but cycling on and off due to sludge. I informed the customer that i could smell fuel and...

Does anybody out their in boiler land, know where i could down load a copy of the service manuals for a Glow worm swift flow 120, any help would be appriciated.

I have a customer who needs his gas fire serviced after moving in recently, he has no manuals for it, which i need for servicing and for the positioning of the coals. No website exists for Grateglow ,i've been told over the phone 6.7kw GC no 3232930 serial no. 55/10065/0, any suggestions please.

I need some advice with my mums boiler. I am Corgi Reg but mainly install new instalations. the fault is that the pilot lights, but does not cross light to the main burner, it keeps sparking at both the pcb and at the pilot , i have fitted a new pcb but still the same, any ideas please.

could anybody help me with a dispute that i am haveing at work, about the height of a vent pipe above the water level of a F and E tank. I thought the height was 460mm where possible, and not just hung over the lip of the tank as in this case. If so do you know of any sites where i can confirm...

Been speaking to a guy whose just been on a unvented course at baxi, and he mentiond that yet another training course will be needed for the clorification of unvented cylinders in the future, will it ever end. Has anyone else heard of this. :evil: :evil:

Could some of the lads clarify for me, where we stand as fitters when we change cylinders and controls? Is it a must by law that we change the poor old ladys rad valves to T.R.Vs who can just about afford to pay for the cylinder change, because some of the leaflets that ive recieved from the...

Last December i had a company round to install sky into my property, and after 20 minutes of scratching his head he finaly got round to doing some work.we had one of those systems with a magic eye, which ment you could watch sky in an other room if you wanted to.Well he finished and gave me my...

A customer has ask me to estimate for a Boulter Buderus 600 range, never fitted one any comments. :wink:

When i bought my house a year ago i inherited a large area of block paveing on my driveway.The joints have been pointed or brushed in with a fine sharp sand, and as you can appriciate digging the joints out is takeing forever.I have done a search and i have found that if i use Simazine pathclear...

I am thinking of buying a gas analyser kit, and was wondering if anyone knew which one would be the best to buy out of the numerous choices out there. :?