Search results

The spark did finish shortly after the gas ignited. the pumpdid make a horrendous noise until i topped up the pressure via the filling loop. Thansk for quick reply

Hi there. I have a Britony combi boiler that is on a pressurised system with one of those large cylinders and a pressure vessel in the airing cupboard. The boiler has been off for some time and now when I have come to fire it up the following happens. When I call for heat the system...

Thanks for your advice guys. I have a week off work next week so I have a week to get the job done to the wifes standard which is pretty high!

Evening. Please can anyone reccomend a type of blade I need for my sliding mitre saw to cut laminate flooring. I currently have a 210mm 24tct blade which is great for slicing through battens but probably will only chew up my floor! Thanks!

Just to update you all, the floor went in well today. The screed was delivered and because the tracked barrow I hired wouldn't start it was a wheelbarrow job and a bucket. 1 cubic metre dumped on the drive but glad I had it delivered and didn't have to mix by hand. Floor looking good...

Thanks noseall. I am pressure testing my pipes tomorrow and hopefully can can some home made screed guides laid prior to the mix coming on saturday. I have done some concreting before but not a final screed floor. My mate that is helping me has some experience so hopefully between us we can...

Thanks guys for the info. What is the latex you mentioned or should I stick to a self levelling screed to finish off?

Thanks. I will see if I can pick u a rotating level then just to get things accurtate.

Hi there. I am in the final stage of my conservatory build. I am having my cement screed delivered on saturday ( as it was cheaper and easier than mixing it myself). I am going to be laying laminate on the floor once level. Has anyone any tips for getting it flat and is there a lazer...

Hi there Can anyone advice me what screen mixture I need to put on top of my HEp2o Underfllor heating pipe in my almost finished conservatory please? I have 70mm from top of insulation to floor level. I have looked at several post but they are a few years old and was after some recent...

Hi thanks for your reply. I realised I hadn't factered in the FFL. From the concrete base to FFL using a good laminated and underlay will be about 155mm. If I use a floating floor what is the process and does it have to have vent for the underfloor to breath? Thanks again

Hi there I am in the process of finishing off my conservatory floor. I have a concrete base and was planning to put celotex down 50 - 70mm. Can I put a timber floor on top or is it just easier to finish with a cement screed? If so how thick should it be and what sort of materials will i...

Hi There I am going to put a rad into my conservatory. I currently have 15mm pipes in my house and was considering running microbore to the rad in the conservatory in JG push fit pipe under the floor. Will the microbore reduce the performance of the rad? I was planning to put in a...

Hi there Has any one used this valve as I am thinking of using it to heat my conservatory on an underfloor heating system. If so is it any good? My conservatory is 10 square metres. I have read the spec sheet for the product but I am not sure now...!

Thanks for the advice. Yest its to building regs have a very low u roof and windows. I will look into the heating unit cheers.

Thanks for the repy. I was going to get a reel of that bpex john guest pipe is that the same as what you have suggested using the sleeved plastic pipe or is that something different? Thanks

Hi I am cracking on with my conservatory and now at the point of sorting out the heating. I am fitting an underfloor heating system using plastic pipe but I also want to fit in a radiator. Can I run 15mm plastic pipe to the rad under the screed or should i do this in copper? Also when I...

Thanks Screwfix have an offer on a hortsman wireless room stat would you think that was any good?

Hi there Can anyone reccomend a wireless room thermostat / programmer or just a bog standard stat that is compatible with this boiler? It is connected to an smp 2 british gas 2 channel programmer which is in the airing cupboard. Thanks

Thanks noseall How did you insulate and what products did you use. A friend of mine has suggested foil backed plasterboard for dot and dab. Not really sure the next step. Thanks