Search results

ok I will run speaker wire to each room But for the sky can i run coax cable and still get good hd picture if i used coax for a HD pic can i use I magic eye Thanks guys

Hi I am building a house and i would like sky and music in 7 rooms i would like speakers in the ceiling but i want all the boxes in one place can any one tell me what cables to run for the remote , hd picture , and how many sky boxes will i need thanks

ok thanks

I plan on putting a DPM on top of my block and beam ( under celotex and lapped in with dpc) floor but when i was speaking to the build inspector he said i need one under the floor as well is this right cus my brickie said its not and I do not see the point in having 2

thanks guys next : where do you get gas pipe from or do they supply it I have the ducting shell i lay that and let them supply the pipe

I am building my house and i have to dig for the services can any one tell me if the services can go in the same trench i have water gas and electric. I know the water has to be below 750 mm deep and the electric only 450 mm deep but I don't know about gas.

I must have a problem one then , since a bought it 3 years ago Diverter valve went pump went had a new dhw thermistor and the system was flushed well

yes and I have a spear meter

thanks new fan then

After more testing found out my multi meter is broke and a relay is not working and there was a joint burnt out on the ignition board I fixed the relay re soldered the joint removed the fan and blow in to the air switch and boiler lights The fan is reading 10 ohms dose any one know what...

yes it was the 2 amp one

Have done it seems fine

Can any one help When the fan cuts in the boiler blows the fuse on the PCB when the ignition board is disconnected from the gas valve it dose not blow I have put in a new PCB so I know its not that could it be the gas valve or the ignition board I am Corgi just have not sorted...

I have checked the flue and fan and it all looks ok the boiler lights then goes up to full rate then goes out then lights then up to full rate then goes out and displays code 29 the boiler then will not light The code says in the book , Low gas Or No Gas or no water in system , but...

please help

I moved this boiler about 600mm over to one side making it only 3 m of pipe work away form the meter with 4 elbows the pipe work is in 22mm it has worked fine for years with more pipe work as soon as I moved it it comes up with code 29 meaning low gas or no gas the working press at...

Can any one tell me the min amount of insulation for a new flat roof extension my joists are 8" and i am thinking of having a cold roof with an air gap can not get in touch with my B C O Thanks

ok with that pressure do you think it will bee ok

I used the kitchen tap mat be it was blocked

i used a flow cup that I got of e bay and had no paper work Where do you take the reading from I took it that where the water comes out the side that s your flow