Search results

Got a Menvier TS690 system installed at home. Great panel - never had any problems. Zones are as follows: 1. Front Door 2. Hallway 3. Study 4. Kitchen 5. Family Room 6. Lounge 7. Garage 8. Landing 9. Master Bedroom 10. Panic Buttons Part Set A is the one we use at night, and...

So what you're suggesting is to somehow connect up (on a temporary basis of course) from the cold main, directly to pipe that comes out the bottom of the expansion tank. Open the bleed screws on the upstairs rads, and wait for all the air to come out. Doing this, the mains pressure water...

Pump is in a really difficult to get to place, so haven't been able to put it on full speed (although it could be on full already!). Yes, when I drained down, the tank emptied completely.

Yes Bottom rads fill. Top rads remain empty. On the new rad I installed. I could remove the rad - leave the valves open, and nothing would come out!!!!!!!!!!!!!

I know the answer to some of this, as when the problem first appeared, I thought I'd re-fill the system with fresh water. I isolated the expansion tank in the loft. I then drained the system down. And then re-filled the system. Same problem. Upstairs rads didn't fill - the...

So if I have sucked some gunk into the system, what can I do to clear it?

Yes, I can confirm the downstairs rads fill up with no problem. I didn't bleed the pump, but can confirm the downstairs rads warm up without any problems

My mother has recently decorated her bedroom and decided that she wanted a new radiator (one of the new convector types), so I drained down the system, removed the old rad, fitted the new one (including a new thermostatic valve and lockshield). I then re-filled the system (expansion tank in...

Thanks for this information - most helpful Do you think PlumbCenter stock these timesaver couplings, or are they normally something they have to get in specially? The next thing is - what's the best thing to get a sample of this pipe out, so I can take it to the shop? Do you think an...

Am putting in a new bathroom for my elderly parents, and have stripped the old bathroom back to nothing, and am planning to replace all the waste and copper, as some of it is imperial rather than metric, so I thought it better to start from scratch. The one job I need to start on is the soil...

Administrators of the forum, please feel free to move this thread into a more suitable category if there is one, as I couldn't find one. We've recently done a ton of work in our lounge, and one of the things I wanted to do was install a system that would pump the Sky+, UHF, VHF and DAB...

It's a Gardtec system. It came with a load of resistors (two different types I think)

Well, yes really. I've got two different types and I'm not sure which way round they go, but I think they go across the alarm and tamper connections.

I've been reliably informed that somewhere on this forum is a wiring diagram on how to install resistors on PIRs. I've looked, then looked again, and looked again, but can't find it anywhere. Has anyone got any idea where I can find it?

Top man. Thanks for that. All now ok. Just the installation to do next!

Thanks Saxondale I'm really p****d off I can't get that expander module working, but I've tried everything I can think of, so I can waste any more of my life worrying about it! LOL I think the software version I've got (v2.6) must be slightly different to what you're talking about. I go...

Saxondale - you're an absolute legend - thanks for your continued help. I know that it's highly unlikely, but if you ever buy yourself a Vincent Motorcycle, log onto the forum that I run (www.vincentownersclub.co.uk) and I'd love to be able to return the favour. Anyway, back to the...

Hey - denford, saxondale and europlex - thanks for all your help with my project so far. I've connected up a remote keypad, a PIR and an external box, then powered up my GardTec 816 panel. Luckily for me, the engineer code has been reset to 1234, so I was able to stop it making a noise. I...

The Reson8 I've got hasn't got the same configuration - it's got. STB- TRIG- HOLD OFF - HOLD OFF + RTN- I'm guessing the following: Gardtec......b/box Strobe+ Strobe- .............STB- Bell +............... HOLD OFF+ Bell -................ TRIG- Bell Hold-...........HOLD OFF-...

If the engineer code hasn't been defaulted, can I start an 0001, 0002, 0003, 0004, 0005, 0006... Until I guess the correct code? Just a thought incase worse comes to worse!