Search results

Hi, I have an old artexed ceiling in a bedroom that has had quite a few repairs over the years. such as cracks and also it looks slightly bowed in places. However, I've managed to put a larger crack in it by stepping onto it when I was mucking around in the loft!! The ceiling is old, from...

Hi, Looking for a painter/decorator to paint the outside of the house. What kind of questions should I ask. Also, is their a reputable association where I can get a professional ? Thanks

Just found a very useful video from the Megaflow website... http://www.heateam.co.uk/replenishing-the-air-gap-on-a-megaflo-cylinder.htm May help other novices. :D Will try it out tomorrow, as had a few beers and don't want to have a DIY disaster on a Saturday night !!! :lol:

Cheers holty, just needed some reassurance before I try to do it myself. Just another question. It says to hold open the T&P valve until it stops gurgling. How long does this usually take ? Thanks

Hi, I have a megaflow (approx 18 months old). When the heating comes on to heat up the hot water I've noticed the overflow pipe leaking water (not loads, but more than a few drips). This pipe is connected to a 'T&P Valve. It only does it when the boiler is on to heat up the water...

Thanks for the info. The British Gas guy replaced the regulator on the mains supply coming into the meter at the front of the house. He then reset the boiler as he had turned off the gas. It has stopped flashing and all seems well. Thanks again.

Hi, I've never noticed this before .... We had our boiler serviced today, and the engineer mentioned that gas flow was dipping below 19. The British Gas person came around and replaced the regulator. He then reset the boiler. I've noticed that when the heating is on the display flashes...

Ah Ha !! - Fixed it !!! The spring has a shorter bit. You put the shorter bit against the lock housing and then bend the longer end back on itself, resting it in the groove of the actual brass lock. Now fixed and sorted. To stop the 'snib' falling off I've put some thick carpet tape...

Been able to get a coat hanger down the hole and unlock the deadlock. However !!!! i seem to have bent the internal spring as the lock hinge won't spring back. I haven't got a clue how it should work??

Just found out it is the 'Snib' bit that has fallen (or pulled !!) off. Is there a way of putting something in the small hole to open the latch or stop it deadlocking??

Hi, the interior nob for deadlocking the door fell off (kids!). It seemd ok until we got back after being out. The door has deadlocked itself. I was able to get access via back door. There is now a small hole where the deadlock knob used to go in. How can I 'un' deadlock the lock...

Hi, Just looking at reducing energy usage and I was wondering about whether I have my boiler on for too long on the timer. I have a 12 month old Worcester Greenstar 30CDi (which I am v.pleased with), hitched up to a Megaflow CL170HE Unvented cylinder. The heating is currently off for...

Hi, Had a lovely new extension in the Summer/Autumn, opening up the back of the house. This required an internal and back wall being removed and steel joists going in with a steel joist pillar holding it up in the middle. Recently, I have noticed cracks in the lounge ceiling and wall...

Hi, I'm looking for a handy power tool to effortlessly sand down my doors and large skirting boards - anyone got any advice on what to look for ???? Ta XX

I've found out that due to the width of our new extension we are looking for aluminium bi-fold doors. Apparently PVC is not good and wooden doors aren't good for wider spaces. Does anyone have any good experiences with any companies + value for money - my budget is running out!!

I have an old Optima G3 - V.large box with keypad on it. It is connected to motion sensors in all rooms downstairs and 1 room in upstairs. How much - cost wise is it likely to cost for a new system ?? Also, what kind of alarm systems are considered pretty good + are mid range in price...

:? Having an extension to the back of the house with new Boiler, cylinder The Builder/Plumber has suggested Worcester 40CDi and a Megaflo CL250HE. The reason for big capacity is that we are then planning another conversion in the loft with en suite. Also, having a Bathroom refit if...