Search results

crowbar and brute strength word :-)

thanks thats good to know , pity I didn't see it and after 10 holes I hit a screw not good

would a plug cutter work ?

photos attached thanks

Hi All I am refitting my bathroom and need to get up the old boards put down for the underfloor heating but they are screwed down and nailed but they are rounding the head if I try to get them up, any ideas how I can get them up as the crowbar method isn't really working thanks

I have a Telford Tempest about 15 years old no problems so far touch wood.

Thanks for your replies, I have sorted out the door sticking I basically cleaned out the hinge which was not cut into the frame properly and tidied it up. The doors was not at fault it was the door fitter who did such a poor job , he did not drill pilot holes , he ripped out the old hinges...

Hi All I had all my internal doors replaced about 2 months ago and a couple have started to stick when I clots the door as though they have swelled, how do I fix it do I plane off some of the door hinges or is there another way. I won't ask the original joiner back as his work was sub standard...

I have had some new MDF wardrobe doors fitted and need to paint them to match existing Dulux Satinwood, I have a tin of water based Zinsser to use as a undercoat, would that be ok ?then put Dulux satinwood on the top. Thanks

I think we had his brother to do ours, I should have guessed when he tied his horse to the lamp post.

Some of the handles stick down when opened

We have had new doors fitted and the fitter has not responded to our phone calls to make adjustments, so I need to know how to loosen or tighten these door handles please https://www.locksonline.com/OLTON-lever-handles-on-rose-zinc-alloy-69052.html?search=olton&description=true handle type...

Mine was fitted 18 months ago and neither has worked since been fitted, both going to be replaced this week, hope the power or gas doesn't go faulty with the time this has taken to be fixed.

Dont think its that as the Hive shows a target of 19 degrees , I think its faulty tbh but gotta get Hive support to sort out or agree

Looking at this diagram https://www.plumberparts.co.uk/advice/heating-systems/s-plan-heating-system mine has 2 valves so I think its a S plan

Dual channel, no other controls and boiler is Vaillant Eco Tec plus 615

Hi All Any experts on Hive here, I have had the Hive thermostat about 3 months now and intermittently like this morning its set at 16.5 degrees at 0830 but the radiators are on and the app shows its set to 19 degrees. I spoke to Hive support who reset the system but didn't properly understand...

Do I how I have to sand it as well :D

Hi All I am replacing all my doors and I want to put quick dry satin on the doors but the skirting will have gloss on maybe 1-2 years old, can I put the satin over the gloss ok thanks

I have a Karcher K3 pressure washer and when I connect to the patio washer it has started leaking quite a bit and sometimes the yellow bit in the lance comes out, anybody know how to fix it , is it a new yellow bit or a o ring see photos please