Search results

Hi I am in need of someone who can turn 4/5 replacement stair spindles. They are approx 600mm long and made from 41mm blanks. Material not important as they will be painted. I am in Leeds (LS7) so was wondering if anyone knew of a company/person that could do this. Or alternatively...

Maybe try a nail brush or similar with detergent

I'm pretty sure that the speed dictates the torque applied. I.e. when clutch will slip

Hi I am currently fitting a grohe frame for a wall hung pan and just had a couple of questions that I hope someone can help with 1. Aquapanel or Ply for boarding out in preparation for tiles 2. method of fixing boards to the frame, or should I make a timber frame and attach to this...

hi, just a quick question Would a Honeywell ST9100A Timer be suitable for controlling a 300W heating element for a dual fuel towel rad?? thanks Andy

Hi I'm no professional but I wouldn't fill a 20mm gap with just sealant. If you're not used to working with the stuff then you may be left with a very sticky and uneven mess! Some sort of beading may be the answer. If I were doing it to my own house I would glue in timber strips slightly...

I would wait till the painting/varnishing is done as most sealants aren't overpaintable. You could seal the bulk of the larger gaps before painting, aiming to leave it flush or slightly below the face of the frame. Make sure you don't get any smudges on the frame as the finish won't stick...

Hi I am currently fitting a grohe frame for a wall hung pan and just had a couple of questions that I hope someone can help with 1. Aquapanel or Ply for boarding out in preparation for tiles 2. method of fixing boards to the frame, or should I make a timber frame and attach to this...

Why don't we just answer the question asked, that would be a lot more helpful

Hi You should remove before the paint dries or you'll not get a clean edge. With that many windows you should give freehand a go, you'll be great at it by the end! Taping before each coat can be very time consuming. Just remember that you can scrape the glass if need be. Andy

Hi Does anyone know if B&Q will have the 3 for 2 paint offer on anytime soon. Looking for a bit of insider knowledge! I need to buy a load of paint in the very near future and I know that as soon as I get it then the offer will be on the next week, which will annoy me no end! Cheers...

Thanks for that!

Hi I am building some cupboards on the bedroom, using ikea integral hinges. Just wondered if someone could tell me the distance to mount the hinges from the door edge. Using 18 mm MDF. Thanks Andy

Hello I am after advice on the best place to locate the distribution box to supply the lounge, kitchen/diner/lounge and bedrooms. It's a 3 storey semi plus cellar. I am presuming that the shorter the distance from the roof aerial to the distribution box would be best in terms of...

Best to move the hinges and repair the holes/damage properly. You will then have to repaint, but I think that this is unavoidable. You won't get the paint to match exactly as it will have discoloured over time, but may not be too noticeable if it's a small area

i'm guessing the fence paint is repelling the emulsion (thinking it's rain!)

Hi I have to refix some small slate sections on some steps. They are vertical pieces only about 100mm tall to cover the stair riser (blockwork), and are purely cosmetic. Would mortar suffice?? I wasn't sure since slate has quite a smooth finish and whether it would adhere adequetly...

hi Just wanting to know what the recommended way forward is for insulating our roof - already an attic room, large 1900 semi. Currently stripped back, no felting, 50% torching intact (have removed what is loose) Plan 50mm insulation between rafters allowing 25mm air gap and 40mm...