Search results

What should i call it,i have a new PC but using my original mouse,keyboard and monitor is that a base box,hard drive or just PC? I'm running Windows Vista Home Premium. I was using AVG free,adaware free,spybot free and windows defender on my old PC. I am still using the old PC at the moment...

I did think of this but i don't know any other way round it

I have just got a new hardrive and before i log onto the internet what is the best free protection that i should download?

Who makes up these ridiculous rules. My decking is built on a slope so of course one end is over 1 foot from the ground but that is the end with balastrades. 20 metres from a highway? why should that be a problem?

I have an IBM computer which is about 5 years old which i have used at work and have now replaced. Would it be viable to replace the hard drive so that i could then use this at home for my family to use and how easy is this to do considering i would have to then install a new windows system...

Take off the air filter and you will see a spring,the end nearest the front of the lawnmower is hooked to a fixed tag,you need to bend the tag slightly towards the front to increase tension on the spring.Only do it a small amount until your engine is running at 3000rpm any more than this will...

Yes they are and that is why so many people end up throwing their lawnmower away and buying a new one when a repair or service would be a much cheaper option.

I think you might be asking the wrong questions. Has this engine been over filled with oil? Has the lawnmower been turned on its side to clean? Has it ever been serviced because the carburettor diaphragm and air filter need to be changed on a yearly basis.

what are the minimum distances for supports if you are using 6 x 2 or 4 x 2 and also the centres distances for the joists?

The semi-damp mortar mix you use is that also 3:1 sand and cement?

Did you shake the can first or just open the lid and stir the paint.? I think shaking can cause the bubbles.

I have some 127mm plaster coving to put up and i understand the point of pining below it to stop it falling and i am using plaster adhesive. My question is that if i offer up the coving to the wall first the two flats on the inside of the coving are not 90 degrees to each other so should i put...

Thanks for that i thought that might be the case.

If you are going to change the oil make sure you use a good quality oil not some cheap rubbish,cheap oil with an SA IPA rating is no better than chip fat.Also it has to be SAE 30 not any kind of multigrade car oil i've seen too many mower engines ruined by this. If you are thinking of...

The skim seems to be as thin as you could possibly get away with so i'm guessing that it is the paper part of the plasterboard and none of them are bigger than 3 inches across and 5mm above level.Hope this explains it enough.

I have a couple of ceilings that have got bubbles in the plasterboard what is the best way of dealing with these rather than replacing the ceilings,i haven't painted these yet but i will be.

Are you saying prime the ply first? and if so what would you prime it with if not PVA?

I have a very small bathroom that i need to tile.When i ripped off the old tiles i then had to reskim some of the walls to the best of my ability,i would like to have the walls reskimed by a pro but cannot afford it.If i want to have nice flat walls can i put up some 6mm plywood and then tile to...

You could try a company called Meetons in Wimbledon(London) they are Villiers experts,it is not an atco part that you need,or try The British Lawnmower Museum who are available online.

The only way is to have the cylinder sharpened by someone who does garden machinery repairs. Do not try to sharpen it yourself or use any of these grinding strips that you can buy they are a waste of money. Depending on what bottom blade you have, that will have to be either sharpened as...