Search results

i was wondering if i can use my dell charger to charge this dyson battery without harming it long term. i notice that the requirements of the battery are different to what the charger can provide but am not sure if its a big deal. help please?!

i probably do but i have no idea where it is....just moved in

lads, its fixed. you may not believe how, here's the story.... i did as advised above and took the shower head off and checked of the flow was different. it wasnt. so i knew it wasnt the head. the bathroom tap was getting hot water just fine, as was the rest of the house. so, i thought it must...

yes it does look like the one quoted.

here is the shower mate...previous owner of home told me its "electric" but the hot water comes from the boiler itself. i guess the next easiest thing is to de-scale the showerhead?

hi. just had a quick check of the pressure of hot vs cold and its really not too different. hot is definitely less though. the biggest issue seems to come when the shower is used. and sorry i dont know what you mean by the isolation valves being partially closed and cant work it out from a...

its an ecotec plus 837 mate. its a combi.

oh right! i had no idea. yes taps and shower especially.

Hi, looking for concrete to be laid in the back garden. There is already concrete there but its cracked and a bit uneven. the area i want done is approx 6m x 3.5m and i want about 3 inches of concrete laid on top and the surface must be flat and and stay flat as there will be a shed built on...

Hi, basically, the flow of water seems very weak but when I check the pressure on the boiler, it says its about 1.5 bar. I thought this would be enough so dont get what the issue is. Also, in the hope that this would solve the issue, I would turn the boiler off and fill the water up as much as...

so this means picking the wires up in the loft and then drilling down through the loft and latching onto the existing switch (but turning it into a double).

i could always drill through the window frame at the top too...dont even need to go through the wall

it'll be stud then

no idea what a stud wall is so cant answer that. i think its plaster. there is a switch there already actually for the landing. i could make tht a double and add this in? but wireless feels the easiest?

ok thanks very much mate. it would be great to get advice on the wireless switch first if anyone has knowledge on this. thanks

oooohhh yes, good points. ok so its going to be either a pull switch or a wireless switch i think. what do you think of the one in the link?

ah ok, so i run the cables across the top of the ceiling and then just install a new pull cord there? i prefer a switch tbh, not a fan of the pull cords. would it not be easy enough, even if it wasnt a wile switch, to run the wires across to the right and down to shoulder level and install a...

wall construction....tile+plaster i believe. click pics below. yes, loft above. i was thinking to have the switch to the right (between the door and the mirror). just to the right of the door frame.

i have this pull switch in the bathroom but i want to change it into a normal light switch in the bathroom which is tiled. click below pic to enlarge. i had a look around online and was thinking a wireless switch would be the best but thought I would ask on here first! any advice is much...

loool i was actually looking for something that was fixed to the wall. i didnt think to look for a portable wireless device! merry xmas lads! and thanks to all...seriously!! a MASSIVE thanks! I know it was a pretty trivial issue now. thanks for your patience.