Search results

hi mate, yes i removed the rubber gasket inside and the beading,it looks" single" as you have described i think,ill recheck tomorrow thanks

thankyou ..the brickie, ill have another go at the weekend(weather looks good).local glass place rang me to say windows ready.one has to be gentle with the hammer me thinks..hehe:) :wink:

are a right bugger to get back on :oops:

bon soir, just bought one of these from cromwell to nudge the beading back into place.whats th knack with this beading,im lil curious??

hi, in relation to a similar post the other day,i just wanted to know how you get the external beads back on without breaking them,ive useda rubbermallett but tends to bounce.ive heard that the thor hammers are quite useful,im being cautious here but maybe a sharp tap with plastic faced...

HELP FOLKS PLEASE!!!! i took the unit out today again because the bottom bead wouldnt clip in properly yesterday so i tried to correct,..so after taking the unit out again i began to make a ****** of things and ended up cracking it(ive had a qoute for this unit and the adjacent one and its £40...

i forgot to mention previously,is there a way of making the unit a little more secure in the frame as you place it back in,although it does seem secure as the seals on the inside hold it tight! maybe there is a trick of the trade?? cheers

thanks mate, its going back into a upvc..872mmx467mm..not365mm

hi all, ive took the unit out today by removing the rubber seals on the inside and then removed the beadingwith(after a lot of searching in the kitchen cupboards) a PIZZA CUTTER.the measurements were 872x365 but the thickness was only 19mm.the question is would i be able to get a...

hi all, i was wondering if i could change these without removing the whole handbrake assembly and complete the job by just removing the heat shields and unhooking both cables from the equalizer bar???? many thanks.

thanks mike,that was quick, there is a run of about 1m which is elbowed from the back of the toilet and then another 90 elbow to take the toilet waste into the main stack.the bath waste pipe is connected into the first run from the toilet, kind regards.

ive come across this today and im not sure wether it totally breaks the regs??? whoever fitted the bath has capped the original waste off because there is no proper run off to drain the bath quick enough and so run a length of pipe to the toilet waste and connected there??? oohh err :roll:

them ere bolts are a bugger to get at ya knows :oops: :x

hi, i was wondering if the gaskets could be reused if in good condition?? thankyou :cry:

ok so theres no takers on this one. i dont know how to disconnect the brake vacuum line from the manifold(does it pull off??...simply) or is there something else i should do..also i cant get the clip off the air outlet pipe.the access to the manifold bolts is a bugger by the looks of it.it...

hi ,ive been getting a rattle for a month or 2 now and its getting worse.its seems to be coming from the inlet.just to add the oil level is ok and the belt tensioner is about 3 months old.i know this has been a problem on the early mk 3(mines 02 plate ) with the shafts breaking and the little...

hi anybody changed cables without dropping exhaust?? the rubber hangers seemm a bugger to get off

howd davieboy,you can always rely on you to reply :wink: with some good advice!! im gonna order some cables(i class my self as a northerner but im south of you..sheffield..so its cheaper down south :wink: :) incidently i rang the local scrap about a lever and quoted 20-25 + vat which sounds...

hi mate,yep i changed the calipers.i think its 13 squid each so bout 30 with vat.what your opinion on the lever mate?? thanks for you advice

hi here goes with another question on my bloody brakes. after having new calipers,discs and pads on the rear,the travel on the handbrake is fairly excessive and only just got through the test. ive had the center cosole off today and noticed that there is slight travel,maybe an inch before it...