Search results

If I cant get the valve off that will be the next thing I will do. Thanks

I have a very small drip which I think originates from the flow cartridge, so I want to take the cartridge out and clean it. I am however concerned as to how much pressure I can apply with a spanner so that I don't `twist` the pipework. Should I just go for it or is there any way to counter...

Thanks to all who replied, it has answered my original post so hopefully I can get on and finish the bathroom refurbishment. Thank you.

Yes it is concealed, out of interest why shouldn't I "The thread on your isolation valve is the same. The flexi hose to join the two directly would be 1/2 inch bsp ,both ends. ( I wouldn't recommend you use that directly onto an isolation valve though ) put it directly on to the isolation...

OK does this image now make sense?

Am I confusing the end fittings thread diameter with the diameter of the flexi pipe? In other words a 15 mm flexi will have end fittings to fit the 20mm outlet.

Will a 15mm flexi hose fit on to the 20 mm fittings?

See attached image. I need to connect a toilet cistern to the mains inlet, Plumber got all the pipework in place with isolating valves, I now have to connect it. A. elbow joint, would this be a 3/4 inch female to male and would I use PTFE tape to seal it on the cistern side? The flexi hoses...

I have tried the upside down bit and cant get near the cables. Looks like I will need to take the heater controls off to access the back. So far I have managed to get the glove compart off and the radio out, How do I get the black plastic console off that surrounds this area. I cant see...

Thanks for the reply, Apologies I have changed the maker from toyota to mitshubishi, my mistake we bought froma toyota dealer in our area. It is a uk model not an import. The heating controls did work before and never felt sloppy. The fan speed side works ok its the control for the direction...

mitsubishi Space star.. The heating controls have stopped working. When you turn the control it sort of springs back so I cant set to windscreen or say to blow air downward. I need to access the workings behind the knob on the dashboard. How do I do this? Do i have to rip apart the...

I have a toyota space star and the front passenger seatbelt wont click into the `anchor` the belt just comes straight back out again. I am doubting if it is repairable, can this part be disassembled? how do I remove this part? I can see the bolt that holds it but need to remove the knob for...