Search results

cheeky cheeky whilst the prices have been pushed down in most areas of the country. and here, the fact remains that when you price a job and get it irrespective of the price you have to do a good and safe job. some of us tradesmen in yorkshire have morals and consiences 8)

:D could have charged more but up here in yorkshire we believe in giving the customer the best possible price :wink:

cold water plastic pipe :shock: inlet from filling loop to everywhere else that needs a cold water feed

do they do one that is compatible? a friend of mine is a fitter for them and will get me the part cheap as chips instead of the £41.85 iv paid today

contacted gloworm for part number of a saunier duval thermacondense f30e z pipe collected part from my supplier and fit it the hole where the cold water filter goes in has a wider bore so cant get it to seal have tried gloworm again and they insist its the correct part. cant get the filter on...

the guy im doing my gas safe with charged £1300 all in last week supply and fit a pro 29 including changing 12m of 15mm gas pipe to 22 and an extra rad we had it done in 3 hours

wouldnt expect you would pay more than £65 and thats a bit expensive

well at least thats sorted lol as i said go for the acrylic gloss

calm down guys its only a forum micmic has the advice he wanted and alls good long live forum humour

its not a gamble mate its guaranteed if you apply it as directed and it yellows ring them and they will do a visit to your house however its not the proper solution to your prob you really need ventilation

cant put them on tenemant blocks pal theres metal on them we all know what the scrags are like for weighing in things that dont belong to them

it will take a short time to register on the dial when your topping up aslong as all your bleed vents are shut and you have no leaks keep filling valve open should take between 30 secs and a few mins depending on size of system

cheers for that steady iv bookmarked the link and will have a good look tomorro you may have just saved a few of my clients a few quid when im next called out we all learn something new every day thats why were alive

me neither which is why i gave you the thanks iv never seen them before and have struggled a few times to deal with similiar probs joiners never make good plumbers lol

johnstones do an acrylic gloss that will not yellow its easier to apply and never yellows that will hide your prob

any of howdens gloss range are very good and durable also magnet trade will be able to supply some highly durable doors however you can only buy at howdens with an account

if you can struggle away and cut it 6" below floor level you could use a piece of 4"waste and a rubber collar. cant remember what the collars are called but if you go into any plumbers merchants they will know if you explain what its for other than that you could again chop it down and buy a...

put a timed extractor fan in and paint with bathroom paint the fans are cheap as chips however make sure you get a competent person to fit it i have extractors in my bathrooms and have them set to a 20 minute overrun i have never had any probs with either even the shower room which has no window

has it been internally lined with plastic its quite hard to see from picture

i suppose from a diy perspective these preholed and shaped cutters are brilliant as they probably dont allow you to "nick the wires or such" but for me a pair of decent pliers are all i need im a joiner so do little electrics (only when legally allowed) but having one tool to do the job is...