Search results

Thanks , yeah that had occured, but why would it run sweet when hot (other than lack of power) , but not when cold ? That's what's got me confused

Long post warning ! Hi folks, I took on a project in the full knowledge that the vehicle didn't run properly , so only have myself to blame! Vehicle - Fiat Panda 1.3 multijet diesel 2010, 100k mileage, full service history. Issue - vehicle struggles to start and when it does it cuts out...

Thanks. Will 32mm OD pipe fit snugly into that S8M connector on the toilet waste ?

Hi, I've got a waste solvent waste pipe that I need to connect to 40mm or 32mm compression fittings and pipe. I'm not sure of the outer diameter, i think its around 34mm. At one end of the pipe run it connects to a connector on the toilet waste with 'S8M' stamped on it, which a bit of googling...

Update: I ended up buying the tool which was 40 notes and to be honest I could easily have fabricated it myself , but nevermind. The crank locking pin didn't fit so an Allen key did the job perfectly well. Took my time and double/treble checked everything. Did a quick prayer before starting it...

Hey folks, I've got a 2.5 dci Master and it needs a cambelt. I've found one poor video in Portuguese on YouTube which isn't a great deal of help. I've read a few posts from people who have said you must use a locking tool. Is there any reason why I can't mark cam/crank cogs with tippex like...

Couldn't for the life of me work out the best place for this post , so here goes. For reasons I won't bore you with I can't put a bathroom extractor fan in my bathroom wall. So I have two choices. 1. Extractor in ceiling above shower and run approx 4.5 metres of corrugated extraction pipe...