Search results

Hello so, basically I need a power lead extension that shall power my small work area. I am not 100% sure on the length of wire needed yet, but plan to have it wheeled outside of the property to cut large sheet goods down. so, here is everything I think I need, if you think I need more or...

Hello so, I have built the framework for my small work area storage shed thing… I built it to a size of wood sheet that I planned on using, but had the opportunity to get smaller sheet boards but a higher quality and thickness, for a fraction of the cost. so, I just want to know what you...

Yeah, this is what I read, with the drilling a smaller size so the screw teeth have something to bite on. I plan to have a guide of screw size to drill bit size, so hopefully I can print that off and laminate it and I can then leave it somewhere handy. Regarding the drilling, yeah I get a...

Hello I just want to say, sorry my communication skills suck, and sorry for all the confusion. I am also newish at diy, I have built my kitchen bbq area in 2021 to try and get my depression under control due to suffering the loss of my cat. Suffering from severe depression anyway this pushed me...

I was going out late Wednesday after school run ends, I hate children when they leave school or go to school. Being autistic I need everything worked out before I go to the store where I know I can get bits checked over by someone, checking I have correct size etc. only then I turn to places...

Helllo, it’s not that I didn’t google, my wording makes bad results. My hole needs to be 4 ø and 120mm deep. The drill bit is that long yes, but it won’t drill that deep… it doesn’t say on this site, but amazon do for other drill bits and by Bosch blue multi mater bits they call it work length...

Hello this is sort of urgent in many ways, can you help suggested anything? basically, I need to join some wood together for my outdoor work area that is being built at the moment. I have sistered two posts together, glued and screwed, as this is the door opening area, it will take the weight...

Hello I am after one of a couple things. First a website that calculates the price of sheet materials by the sq meter, if this is not something that can be done, that is okay, if you can tell me how I should work this out, I mean this part I can work out after I have slept some, as I am too...

I am thinking of putting in a roll out work bench, and that work bench to be a wood storage area, with a smaller shelf that I can store some 2x4’s that I would be working on. This is going to be on the car port area against the fence and right next to next doors garage. So the wind and weather...

yeah, there is a slight slop, I live on a hill, but the bit of the hill I live on has been cut out, so I live on a wedge removed area of a hill, but its all slightly slopped so water runs and doesn't puddle. The area underneath the grass, is actually a car port, and behind the fence, is a drive...

Hello so picture below shows the gap, and rough layout of the shed, the rest of the area is 8ft x 12ft where I can use this as an outdoor workshop. The shed/storage/work shop will be 78inch wide, 6ft high and 3ft depth. the gap underneath is essential if no cap, the water run off puddles…

Hello I have taken the speaker apart once more, and I can't access the battery as its somehow built into another section of the speaker that I can't open without fully breaking the speaker. I do however know that the battery is a 3.7v 1800mah with a JST Connector 2 pin. So, its a very poor...

I am going to have to put the whole structure of this mini work area on some sort of footing, I need it to be 2 inches off the ground as it were, this is due to living on a hill, a flat part of the hill, but where the water runs off our garden all the water would sit there and will rot the r...

I have seen videos of people upgrading the usb port, but to me it is a complete hack and surely the chip controlling that port won’t work well with the usb-c as it wasn’t programmed too in the beginning. somehow the battery was perfect until I took it away on holiday via aircraft and somehow...

Hello I have a really good, but unfortunately semi broken speaker. I can't remember the details of the make or model, but its a really good sound speaker. The problems is, I somehow broke the micro USB port. So, the only way to charge the speaker, is to have the cable in a certain position...

So, Wickes are doing a deal on some CLS timber, and its for indoor recommended usage. Now, I know in the USA, they use this and put some type of wrap, before putting on the cladding for their homes. Now I know their homes are going to be indoor, but could I use something like this? I plan to...

Hello I have a custom made desk, made out of I believe MDF, and the desk has some key features. Its built in, in away that its attached to the wall and can't be moved and has just 1 leg - side that is a leg... anyway, this was built some 10 years ago - I want to say more like 13 years ago, but...

we couldn’t understand why the paint bonded so well in parts but didn’t in others. It looked liked more like camouflage than anything. Found the combination of, using bartoline tx10 paint remover, a large Makita steel wire cup brush, thick, medium and thin steel wire balls, with more paint...

Hello, so I have a floor fitting crowbar type tool, about 30% of paint has fallen off and unsure what type of paint it was. This has been fully stripped now. The second tool, was found about a year ago, I can’t remember when but we have had our fence panels replaced a lot over the last 25...

Hello i have a few items that are/were in need of paint removal, my sister got some paint stripper she said was really good, so this past week, I have been using paint stripper, but it wasn’t really doing anything, so I got some other paint stripper that was recommended by a man in the shop...