Search results

Cheers for replys (even the smart arse ones). Whilst i would love to have give the boiler a full strip down and service and given the pcb a workout on a test rig and loom it was in fact Xmas day. I think the fact that the heat and hot water was back was service enough given there were...

Cheers fellas Sorted it. Took it off cleaned it out and sealed a treat. Pressure must have dropped without knowing and bit of crap got stuck in it. Had to replace a capacitor on PCB which had blown due to water ingress. Alps well. Cheers.

Doesnt appear to be anything to turn. Are you getting confused with pressure relief valve? Its auto air vent thats leaking

Bloody xmas morning and no heating big puddle no pressure turns out auto air vent is leaking. Anyone know if i can do a temp repair till i get a new one. Thanks

Hiya fellas anyone fitted these and have a view to how good they are? Cheers

Cheers Fellas I was considering the fact the flow rate appears exceptional for the price. Seems i would pay double for the same rate with other boilers. To be clear i was not contemplating an ILLEGAL installer. But i find all this efficiency stuff garbage given what the Chinese and USA are...

So is this a condensing or not. Is it any good as well ha ha Seem to be lots of probs but parts seem reasonable.

Eh Up All Baxi 105 HE is being sold at Plumb Centres for £499 plus Vodka & Tonic. I am assuming this is cheap because its not Part L compliant??? How can they flog em if they are not lawful. Anyway to get round Part L To install in new extension. Cheers

Thanks for replys Fitted replacement vlave and everything ok on that fron now. However i noticed that the hot water is shutting off before its properly hot. Ive examined the tank thermo and it doesnt appear to do anything. IE it was set to 50 degrees turned it up and nothing happened...

Sorry forgot to ask.... Ive read you can replace the motor if its that but nothing else ie new valve. Once motor is off i take it open circuit on multimeter means goosed motor?? thanks

Howdy Doody Sister has an ideal classic boiler with acl lifestyle controls (room stat, digi programmer and the above mentioned valve. Called round to no radiator heat and found hot water works fine and so does the heating when hot water is called for. Turn off demand for hot water and...

Sorry chaps seems ive put you on a bum steer. Turns out its a BKV 105N hinge but has Mila stamped on it for some reason?? Looks like i have to remove door and knock out the black plug. Does this appear right? http://www.gluskebkv.de/en/produkte_uebersicht/bkv_105_n.php

Eh oop geezers Anyone know how to take of the hinge cover from a Mila (trinity i think) door flag hinge. Finally got round to repairing my porch door and i find its 10mm out of square (the door itself) and the top hinge looks crooked due to the amount of retraction it has been adjusted to...

Ok Doke Thanks for that. Im on with it using option 1. Ta

Can anyone give my circuit proposals the once over in my last post. Cheers

Sorry about this i'm just double checking. I have 3 trannys rated at 20-60VA dimmable, soft start overload protection. I need 9 lamps in the ceiling with 20 wattG4 bulbs for an ambient light effect. This will be enhanced by task lighting on a seperate circuit. My plan is too site the...

Message received. Cheers

Sorry misspelt should be Helacon connectors rated at 24 a http://www.hellermanntyton.co.uk/products/classifications/products?PRODUCTID=148-90000 As these trannys are so cheap im happy to put one on one lamp but is this going to make them under perform? Cheers

Cheers for response trannys are made by One Electrical with 10 year guarantee from WF. I asked for a good make and was told these are perfect and they never get any back. There is only one connection so i assume i will have to use mini junction boxes if i want to put multiple lamps on one...

You need to know if its still moving. Various methods such as gluing a microscope slide over the crack using a strong resin based glue. Get the slides from a decent chemist. Dap glue on either side of crack leave to set. If slide breaks its still moving. Same method with 2 plastic window...