Search results

Hi my brother has Samsung le26b450c4w TV hardly used but the remote would only Function if one is 4/6 inches from the sensor ! Replacement new remote did not solve the Problem! Am I right that the TV IR is faulty and needs replacement? If so where do I get one From? Any step by step guide...

Hi I have this laptop with built in wireless with "g" speed is it possible to add USB dongle and get higher wireless speed? Thanking in advance.

Hi I opened mine with a driver identified as "triangle head" kindly note there are 3 sizes! I got mine from CPC.hope this helps.my toaster was 4 slots.

Hi I need to put two ends to RJ11 I do have ends and the tool.the cable is cat 5.but don't know the number or the colours I need to use.One end will be for the Router and the other end with the adaptor will go to BT.thanking in advance.

Mursal the failure from what I understand is axle 1 which if I am not wrong is front axle. In the ATL test it shows 30% axle 1 and there is just dash (-) in axle 2 no figure in axle 2 hope this clarifies. Thanks for your help.

The car did passMot but it f u mean failure on the imbalance then yes.my knowledge on car is very limited.you also mention failure on the rear axle but am not familiar have given facts as I know in my first post according to the paper work provided.am confused if only the front axle is involved...

Sorry! kia soul with 17k on the oddometer and petrol engine 1.6

Wife's car 4 year old went for Mot which it did pass but the ATL test results under brake force of imbalance % axle 1 is showing 30% and dash (-) under axle 2 and in final test summary under service brake force imbalance the limit is 25 % resulting in final value 30%with overall result fail...

I have put insulated boards on my metal garage door (xtratherm) the boards have silver foil finish and am thinking of either painting them or a another inexpensive option I am also concerned about paint if this will start peeling off in time also if the paint has to be emulsion. Any help/advise...

rocks1 thank you for all your help! after few hours managed to get service parts list unfortunately the maytag uk website not much help! the list doesnot have anything called "SEAL" . so the only option would be to try and remove dispenser! :( :?

thanks for your reply however need further help to identify this seal(am assuming that I will be able to get to it from the door by removing the dispensing unit) my model number is GS2928EEDW/11 and kindly let me know where will I get the seal from! thanking you. ps. fyi I shut the water supply...

hi my American side by fridge/freezer is dripping water from the water dispenser! I don't use the ice facility (have turned this off) any help advise will be much appreciated. thanking in advance p.s. maytag model M29iW

Hi I intend to transfer (copy) files from xp to windows 7. I understand the best way is to use ms easy transfer software! my question is if i do this then will the original files on xp will vanish or will the easy transfer just copy and the original files will be on xp. (ideally i would NOT...

the replacement is from the local shop but the cord is still made in china like all the others!

my laptop cloverleaf cord with following spec had ac cord burn out(neutral) hence the 5 amp fuse was not blown (my assumption) the cord was .75mm. the psu is input 100-240v 1.2A 50/60hz and out put 19v 3.42A. The psu is ok as i have checked with multimeter. My replacement ac cord is .50mm...

hi 1. About to buy new pc which will be housed in workstation with door to access the computer (so two sides will be closed and the third side will be wall and the fourth being the door) i have an option to add fan either on the side or infront! do i need this fan? if so which one (non gaming...

I am not sure if this will help you but worth a try! i had similar problems on my american fridge doing the same thing and j did the following hope this helps! 1. switch off fridge+freezer and let it defrost 2.in my freezer compartment i had to open thr plastic cover to get to the area from...

thanks for the reply. The system is 12 year old. the house has a water softner also. the problem is recent started this year it mostly starts happening when taps are qtr turned. all the gate valves and taps isolating i have double checked and all are open. If it is the vent pipe then i dont...

hi all Intermittently am having air in hot water taps. some days it is ok and others not. In the past 2 weeks have have emptied the hot water cylinder but the problem has not gone away.my system is conventional boiler with indirect copper cylinder with central heating header tank and large...

Am in the process of new pc below is the spec 1. mobo msi 99oxa-gd55 amd fx 2.ssd 120 gb ocz agility3 3.processor amd predriver fx8320/8350 black edition 4.hard drive 2 tb sata111 6gb 5. o/s Win 8 A novice so any help/advise will be appreciated. my questions: 1. Is it ok to have ssd and...