Search results

  1. I

    Kettling noise boiler help+ air in cylinder

    Hi many thanks Mike &JohnD Yes! Shower pump without any flanges could be the culprit few years ago when plumber replaced the shower pump He said flange was not necessary! Fyi cws tank is 50 gallons and the cylinder is 140 ltr capacity since my initial post I have drained the system added X200 &...
  2. I

    Kettling noise boiler help+ air in cylinder

    Hi For the past week 20 year old work horse boiler has started kettling noise ( medium pitch) boiler has had bi annual service and x100 topped up over 6 years ago when 3 port valve was replaced 1.Boiler potterton profile 100e 2.F&E tank 3.10 Radiators 4.HW storage cylinder with thermostat...
  3. I

    Add pir light to existing outside light !

    Hi SUNRAY Many thanks i got it 100% with the diagram just to let you know from connector block in The bulkhead there is only ONE brown going to pir ( as it is twisted hence looks like two browns) hope This info does not change the diagram! Regards
  4. I

    Add pir light to existing outside light !

    Efl many thanks! Agree dont need a diagram! Your conclusion & me rested got it ! Thanks again kind regards all
  5. I

    Add pir light to existing outside light !

    Hi ! Nearly there! Being of retired age! Am slow to understand all i have to do is make connexion to white wire! My final request To Efl or Sunray if either of you can draw me final diagram or give me link if there is one kindly note i have T&E cable once Thanks for all the help!
  6. I

    Add pir light to existing outside light !

    Hi thanks all ! Facing the bulb holder from the left side there are two blue wires one is going to Neutral and the Other is going to pir! From the right side there is white wire which is going to pir! Hope this info helps
  7. I

    Add pir light to existing outside light !

    Hi sunray! Yes there are 2 browns on the L terminal
  8. I

    Add pir light to existing outside light !

    TTC thank you! Am ok to follow diagram as provided by sunray before i uploaded photo! As the bulkhead does not Have switched live there needs to be modification! Is it possible for you to draw diagram from the photo if not then I will have to look for sparky or take up the option of stand alone...
  9. I

    Add pir light to existing outside light !

    Many thanks TTC & SUNRAY ! and yes pir to operate both lights! Attached photo & installation guide Look forwad for final input & thanks again
  10. I

    Add pir light to existing outside light !

    Hi i have outside led light i think 3w this operates from a switch i want to add outdoor bulkhead pir which is 60w so if the switch is left ON then pir is activated & so is led light also when pir is deactivated the led light also switches off ! Currently there is 3 core cable operating the led...
  11. I

    Replacement doorbell button switch help!

    rsgaz many thanks for pointing out the size! I was only focusing on water proof one ! But also now understand This is normal switch!
  12. I

    Replacement doorbell button switch help!

    Hi i need to replace outside doorbell button switch the main unit is 9v battery operated 2 wire system I wanted to replace the button switch with screwfix code 54649 ip66 20a switch! Thanking in advance and excuse my ignorance as am poor with diy also retired.
  13. I

    Replace toilet pan (bowl ) only help

    Hi Retired neighbour has asked for help if it is possible just to replace the toilet pan and use the old cistern. Are they all standard for the cistern to fit? He is aware that best option is replacing both the property in question is rental few months ago the cistern has had complete...
  14. I

    KINETICO WATER SOFTENER faulty or not??

    MVL you most welcome ! Am happy that the info has been helpfull Regards Ih
  15. I

    KINETICO WATER SOFTENER faulty or not??

    Hi kindly note i am a user of kinetico water softner am sure there are better qualified on the forum! From your photos salt dissolving is ok (mine does same) i have had mine for over 18/19 years and Yes the regenaration is done by the unit and not manually unless there is malfuntion on the unit...
  16. I

    Kindly help recommend car light bulbs

    DaveHerns definnately not they are shiny clear! Kind neighbour car enthusiast polishes headlight possibly Once a year when he does his merc+ peugeot (his & hers) but i will have to get bulbs forum has identified the options will keep old ones as spare!
  17. I

    Kindly help recommend car light bulbs

    Nigel F good idea when i am driving but regreat not so for her! Agree new bulbs will light better but I need to get a fix on which ones!
  18. I

    Kindly help recommend car light bulbs

    Hi car is kia soul 8 year old with original bulbs and i think they are (dimming) less light there is very little Night driving i think they are h4 need help to identify replacement which are legal so no modifications etc Are led bulbs ok? Are they legal? Or do i stick with halogen ? Make with...
  19. I

    Sticking gear!

    Technician who replaced the clutch sent me photo of the old clutch with caption " i am sure your wife can bake Good cake" but this time she got it wrong it is Burnt" time to look forward to new year!
  20. I

    Sticking gear!

    Dave spot on! My 20 year old final year uni going lad confirmed that & told me she will need an auto as also Your advise! Cant teach old dog new tricks!
Back
Top