Search results

What does it show when you try to connect via your phone …does it broadcast the SSID ( this will be the code o side the smartcom eg ARH0000001

Both

Take lid off sensor ….it will come up ….input ….x ….write each one down ….then you know

Hikvision are backwards compatible ….cvbs-2mp -5mp …..newer machines multiformat …I think after seeing what that new PTZ looks like on a 1080 monitor ….its a different view on cctv ….

Just an example …. 8 channel 5mp ( think you can have 2 channels at 8MP ) plus you can add ip cameras 2 hard drive bays poc ( you can fit cameras with just a coax it sends 48v down the cable ) POC compatible only

Ok you dedicated controllers for the PTZ s So any dvr can do …

What protocol is the existing ( working ptz ) using ? Most modern ptz use a data connection that is transmitted up the coax Older ptz will use the RS 485 ( a twisted pair to the PTZ ) the hikvision dvrs do support both , some cheaper ones don’t have the RS485 Post some pictures of the rear of...

Personally I fit hikvision other manufacturers available…..again it depends on what other cameras you have connected to it …

See image below unless that camera has something like this then it’s not going to work …

Jesus …how old is that ? You’re going to have to set the dome to CVBS …and I think that’s where your problem is …is probably a on screen menu on the dome which you can’t get to as your dvr doesn’t support it …

Ok …so it’s 2mp multi format ( some multi format cameras have a joystick on the bnc lead …eg push up for 5 secs for TVI …push down for CVI …Some have a cap with two dill switches for the format ) …..what dvr is it connected to ?

Is the new camera the correct format ? ….what did you have connected to what ? And what have you replaced it with ?

The stat may not be in your house …it could be next door or across the street …

Street lights ? Wireless central heating stat with low batteries ?

Have had super rods , cheap thin rods and c&k rods …..the c&k ones are the best they don’t snap at the treads and the spiral flexi rod is fantastic for feeding up into lofts …

first thing ….google veritas engineer manual …

If you need a com - ip I may be able to help as I’ve got a few on the shelf

If you full set it … it will activate the alarm If you part set it ….it will start your entry timer

Yes

you probably have arming via final exit ….should be timed …hall should be guard access ( this becomes a part entry exit when you part set it ) if you set the guard attribute to on …your entry exit door becomes guard in part set …