Search results

Hi, Can anybody advise what is wrong with our Apple tree and what the cure is. thanks Dave

Hi, We want to create a new downstairs toilet in a 30s built house. Space is limited and have a width of about 960mm and depth of 1100mm from the back wall to the door when shut, the door opens outwards. Leaving approx 480mm from the front of the toilet to the door. A small basin will go on the...

Thanks all for the advice

The house was built in the 30s, Im guessing the floor was put down later and maybe after central heating was installed. If it is tar/bitumen would it be possible to use a heat gun to lift some in the areas where new pipe/cables are needed and the replace. Cant get pictures at the moment as not...

Hi, I have finger parquet flooring in our hall and dining room. We are rewiring and renewing heating. The parquet flooring is in very good condition and we would like to keep it if possible. Please could I have some advice on how to lift some of it to allow access for new central heating...

The Premier Elite 64w that is fully wireless. I have builders coming in and want to temporarily disconnect the power from the panel and remove the PIRs and Keypad for about 2 months. I would like to leave the 2 wireless sounders in place without removing the batteries and not have any risk of...

Sorry it’s my terminology. When arming the panel emits a tone which I would like to turn down the volume or if not off. Just leaving the keypad tone on for when arming. Thanks Dave

I would like to know how to turn the panel chime (think that's the right term)off or turn the volume down on the panel when arming the system via Wintex. Keypad chime to be left on when arming. Thanks Dave

Thank you for your assistance. I left the system on all night and miraculously its working this morning. Although I left it for ages yesterday it wouldn't work. Cant find anything about how long it needs to be left anywhere, and I would have thought deleting and relearning would have worked...

Not tried that yet. What I don't get is that it was all working fine before I moved it to the new house. Thanks Dave

Hi, Thanks for the suggestion, have done all that. Exactly the same in a different zone.. Thanks Dave

Just reinstalled my 64w All PW-W PIRs working fine. But I have one DT-W that keeps giving the error 'radio not ready wait b/f arming'. If I delete the DT-W the system arms and works. Have tried re learning, walk test (didn't respond) and putting in tamper(did cause alarm) Cannot arm with...

Thanks, yes the tamper was not closing correctly.

Hi, I am just re installing a 64 w and have a Tamper fault on a DT-W. The keypad is showing tamper fault and call alarm co. for service. Cant reset using master or eng code. All other zones are PW-W which all reset ok with master code. Any idea how to reset the tamper. Thanks Dave

Thank you. Probably a daft question but how is the Mesh recommissioned. Thanks Dave

Just moved into a house with a Scantronic 9800+ and am replacing it with a Texecom. The scantonic is serviced and working but don’t have eng code. it has one internal sounder and 2 external. One maybe a dummy as no flashing light. Do the the external sounders have battery backups or will they...

Hi, I flashed from 5.00.02 to 5.04.01 I was hoping that the previous programming would remain, have it on wintex so no great issue if its doesn't. Assuming the data remains Im not sure what the best way to power it all up, and was hoping not to have to learn all the peripherals. Not a big...

Have moved houses, taken the Elite 64 with me and am now ready to start the system up. Have flashed to the latest firmware. My questions are. 1. After flashing the firmware and removing all power will the setup from my old house still be stored, setup in new place will be the same. 2. Got all...

Activated in a box, sent back for replacement under warranty. Thanks for all the comments Dave

Thanks for all the pointers will try what you mention to see what happens. My current bet is the sensor, but I've lost bets before :) Thanks very much for your help and sharing your knowledge. Dave