Search results

I have a nice old teak bench made by Lister. After cleaning it becomes a rich brown colour (when still wet). On drying it returns to a silver/grey colour. What is the best product to retain the colour? I've been advised not to use teak oil! Thanks

I have a 2 gang dimmer switch, both sides of which switch 4x25 watt G9 bulbs. One side is fine but the other will only flicker rapidly when switched on. I'm sure I fitted dimmable bulbs but should I look at replacing the bulbs or the switch? It has been fine for several years. Can a dimmer...

Thanks to both. I now feel a total idiot. Seems the main power supply had tripped out on the consumer unit. Unset light is now steady and unit is armed . Many thanks again!

Edit-engineering code 1234?

Many thanks , just noticed now I've turned my hearing aid on:giggle:! that there is a very faint beep when using the keypad. Can I stop the siren from sounding while I remove the cover to replace the battery, do I use an engineering code 4321?

Hi, Pressing the buttons on the panel produces no "beeps" and alarm will not set. The "reset" green light is flashing and not steady as usual. The green "power" light is lit with or without mains power. I started to remove cover to replace the battery, having removed mains power, and the...

Sorted, switched to "off"- eco is on ,still have hot water but slow.(y) Thanks for advice.

Thanks all, will report back

Timed, on, once and off . thanks

It's a Greenstar 37 CDI FSN GB NG Combi Fitted with Worcester DT10 RF Plug in timer with remote programmer. Just seen somewhere that if the hot water is switched to "off" the eco will remain on, but surely that means no hot water? Thanks for reply

Can I resurrect this thread, if set to "off" then surely you have no hot water?

I'm trying to use the "eco" function on my Worcester Greenstar boiler, to turn off the pre-heat. The light will go on but will be off the following morning. The hot water is switched to "once" Any fix please, Thanks

CPC?

I'm not "setting a trap" .I simply want to light up a passageway for my convenience. "not strictly legal" ?? An intruder should not be there in the first place!

Not sure if this is possible:confused: I'm fitting one 16 watt LED PIR flood on a rear wall. There are 3 existing conventional lights on the same wall switched from inside the house. The cable for these runs in trunking past where the new PIR light will be fixed. Is it somehow possible to tap...

Titan 2700 watt arrived today, looks good, with accessories I'll probably never use! Does anyone supply an adaptor for an underbody lance from Nilfisk to Titan? I have the old Nilfisk E 140.2 , if anyone needs parts please let me know.

Ps Will uprate extension cable for new washer @2700 Watts. Do I need cable rated at 16 amp with 1.5mm core or is that too much? Thanks

Update- helpful engineer in Bolton changed the cap. but reports that motor is on it's last legs so bin it is! Now had 2 Karchers and this Nilfisk -Next?

Thanks all, Anyone any thoughts on Tritan washers from Screwfix? Had Karcher (binned) and Nilfisk

Many thanks, seems I need a special long tool to access some of the Hex screws to get to the cap, so long drive I think!