Search results

all i can say is take it apart see if anything is visibly broken, if not your chances of repair even if you can find something is very low. A new Wiimote is 99% likely

I would hate for you to forget to turn the fan on and bounce your shower :) if you are hiring a core bit do two holes they are simple enough saves any future moisture problems. as for the plug top its not the ideal way to do it but if you fuse it down at the plug i see no real problems

IMOP and i am just a puter techie 2 i would put separate holes for each item unless the extractor for the bathroom has non return vents or you may find your shower smells like bounce :) If it were me and its brick i would go for the core bit, its easy when you get it going!!!

I have a septic tank old brick style out in out paddock. 4 bed house in the sticks. I want to re do the land drains as i am sure this is not adequate or is choked up, i am after advice on doing this myself as i can get hold of the tools no problem and cost is an issue. I also like to know how...

Brilliant that the news i wanted :) thanks for your advice!!!!!!!!!!

Yep i have seen many of these things they are on lots of forums giving free links. the pictures are small so no good to watch all the time. I have watched some football on it a few times but it soon hurts your eyes

I have not been able to locate it in my house (circa 1820 farm house in the sticks) Softus you aint seen my house m8 3ft thick walls and pipes all over the show i suspect its hidden behind the kitchen units but until i replace the kitchen i am not going to start ripping panels out to find it...

I missed this one. How does the ice maker work? we used to use a cleaner when i worked on the fridges i think it came from the states i was a bit like beer line cleaner but you had to run it through the system then drain it off fill with water and let it do about 1 1/2 hours of ice production...

the stop cock could be anywhere you need to hunt it down, most houses have them under the sink but at my house i am yet to locate it so i have to turn the water off outside at the water meter.

I have read about it a little and i can see the good and bad sides to it. If there is a future without oil this could be the tipping point, if it works use it.

obviously not lol :)

I need to put a 110mm hole through a 3ft thick wall made of stone circa 1820 house, its to put an extractor in the bathroom. Just want advice on the best tool for the job as i know its going to be a ball ache as it takes long enough to drill through to put a cable in for TV etc. I am open...

Thanks for the reply i was going to metal clad a wood frame as it gets one hell of a battering up here in Wales If its under 3sq m i can build you think? maybe i should build two ;)

I want to build the above in my field for use as storage and workshop for equipment, its circa 1 acre and i plan to have some live stock on it, i will also store my caravan in the barn/shed so it will be of a reasonable size. Do i need planning and what sort of sizes get passed these days...

One thing i was warned of when i did it was to make sure there was a gap between the house and the deck as the DPC more than likely does come that high but that is just what i was told.

I think if you PVA it the adhesive sticks to the PVA and not the sub floor thus it can then come unstuck very easily meaning your tiles will be poping off all the time with movement

I work in the GP OOH i am not a doctor but i do know if you ring us and you are genuinely ill you get seen by a Dr or a Nurse practitioner depending on your illness. Not having your medical records in the OOH is a big problem but it all comes down to patient confidentiality as YOU the patient...

Can you re-plaster the whole lot to bring it all level? some pictures would help if you can upload them

I have used the unibond one with good results, but if its never cleaned down once its stained thats it IMO, strip it out and do it again. But i am only a DIY'er/landlord :) so i may be way off. If the room is moist this is not helping either so is there any way to extract the moisture?

I would buy a new PC that one has served you well!!! But TBH most static problems dont happen these days buy a wrist strap if you are worried i personally just make sure some part of my flesh is touching the chassis. I am thinking it is prob graphics card and probably the easiest for you...