Search results

Hi Thanks by the sash do you mean the actual door? So put a straightedge on the inside of the frame where the lock is and on the actual door?

Hi On our composite door from hallmark panels where the lock is on the door and the frame there is a draft coming through. I have had the company out who adjusted the screws on the frame who said that it will help push the door against the rubber seal which will stop the draught but...

I agree but lots of tradesmen these days look for the quick fix solution rather than a job that will be long lasting Abd being a woman they sometimes think they can pull the wool over your eyes so I just want to make sure that the job is done well

Sorry guys So is a concertina a good idea or a bad idea if concertinas are the way to go which brand should I ask him to get Just want to tell my plumber on what's the best solution not the quickest from his perspective

Sorry please ignore me its been a long day! So I should just say use the 90 degree bend instead of the concertina Will he have to cut the soil pipe so that the new toilet is central? I am unsure whether to go for a 500m or 600m unit as the aim is to box the soil pipe in and make it look...

What should I ask him to use instead of a concertina? Many Thanks Lauren

Is this picture any better? If it is a 90 degree bend what should I ask him to use instead?

Thanks all So as long as it's a concertina macalpine fitting it will be fine? or should I ask for a plastic pipe?

Hi I am looking for some expert installation advice please as I am due to have a new back to wall wc furniture fitted shortly by a plumber and want to make sure they correct job is completed i..e http://www.roperrhodes.co.uk/product/600mm-back-to-wall-unit-including-worktop/ The toilet...

Hi Our house has really poor hot water pressure around the house, there is plenty of head height (nearly 2 metres) between the hot water cylinder and the cold water tank. Could it be the gate valve needs replacing or there is silt in the pipe between the cold water tank and the hot water...

Thanks but the new rad should be better than the one that is currently there as shown in the pic? As for adding a new rad the only one that would fit is a slimline vertical radiator but would the pipe work cost much as it would have to be run under a suspended wooden floor which they could...

Any ideas on the last post?

Thanks both the room is 4.8m long 2.6m high 3.6m wide Double Glazed Window Not north facing Suspended timber floor Unfilled cavity wall - room 2 outside walls Cant really get another radiator in the room but looking at the B&Q radiator calculator would the Myson BTU of 5885 be ok...

Hi Would replacing my existing radiator which is approx 300mm h x 1300mm wide with http://www.heatandplumb.com/acatalog/Myson_Select_Compact_Radiator_400mm_High_x_1400mm_Wide_Double_Convector.html make a difference to the temperature of the room. As I don't think the radiator...

Thanks What about for the gaps internally around the window frame? Use Silicon for this? If so will any Silicon do?

Hi I have just noticed that in my bedroom window the window doesn't look as if its been fitted properly as there is a gap running across the right hand side and part way across the top internally. On my other windows they have used the pvc trims down the sides so I am wondering if its worth...