Search results

Ahhhhh! now that's a good point, that would make sense with the Heatre Saudia Megaflo water system right? That's unvented as far as I remember. In that case, would there be any danger with poking it outside closer to the ceiling height of the living room? It would still be below the bottom...

Hi All Removed a box section the living room - was really bugging me! :D Found the pipe in the pictures below, it has marking which say its a 28mm pipe - but its empty? I.e. nothing flowing through it! I don't know where the pipe starts from, but it comes through the floor space up...

Right this is how it looks from the side: This is how it should look when it's finished.... as you can see from the drawing above I have no gap between the stove and the outer skin of the chimney to fit the stone surround on :(

Hi All Got my new Stovax Cassette Stove, supposedly slots in where the open fire used to be :lol: Anyways, after offering it in to make sure it all fits, I noticed that the outer frame is flush with the plaster work? It shouldn't be like that as the stone surround needs to fit behind...

Hi and thanks for the advice. Being a modern house with the open fire I suspect the chimney should be to the correct spec already... my question was more related to how I should vent the stove? For example, would I run a meter of flue pipe up the chimney to then connect to the top of the...

PS this is the type I was looking at:

Firstly a very Happy and Prosperous New Year to all!! :D Thanks for reading my post, my question is this: I would like to install a wood burning stove in place of my real/open fire. I am reading this is possible and has been done before but am having trouble seeing how? I have a...

Thanks for that extra info ..... I am hoping to use the elbow bends for the push fit type waste pipes, will this be ok? They are quite tight bends :(

Thanks Chris, It was the bends I was worried about. In an ideal world that pipe would run in as straight a line as possible with a good slope but I have to put 3 bends in :(

Sorry - didnt realise i'd have to go through the photobucket route!

Hi All Firstly, thanks for looking at my post. I have a cloakroom that I would like to "turn around" - basically have the toilet where the sink is and the sink where the toilet was. I have drawn a diagram to show what I mean... What I need to know is if anyone can forsee a problem with...