Search results

I came to see this coffee machine which has no power and found that the suppressor (FLCB431561) looks not right and when tested it did read very low resistance and the input fuses blown, any idea where can I get this part and a circuit diagram for the machine or the suppressor. The Make of the...

Thanks Tony, once you sent me your private email but so how I can't find can you send it to me again.

Thanks Tony, you seem always making this remark, I don't repair the gas side at all, I only look at the electrical & electronic side, so a dead boiler got nothing to do with the gas and after I posted the problem today I found the problem, it was the transformer's primary open circuit and...

Hi, I just called to my friend's house as his boiler ICOS HE 18 is completely dead no light on the front at all, checked the supply to the boiler is OK the on/off switch is OK, could it be a PCB is faulty? any help please

HI every one, I have some of the MEM 8000 grid switches and I need few of the Yoke and front plate ( for 4 & 2 gang ), any idea where can I get these as I tried the net and ebay but had no joy.

Hi every one, a biasi M90S does not start at all in both HW & CH the only thing running is the pump and the green LED flashing faster than usual and after few seconds the middle red LED comes on..any idea

Hi, a problem with the above boiler as it goes to lockout when DHW drawn, with CH some it goes alright for a short time and then it goes to lockout or it goes to lockout straight away, any help/

will all of you forget this E33/E34 codes and if you read what I'm saying you will see the fault is that the boiler runs EVEN WHEN NO CALL FOR DHW OR CH, Ariston told me if all ok then PCB problem so I just wanted to make sure if any of you had done this fault before

like what? mind some times it works

in the kitchen, but why you asking does it make a difference?

I replaced it with new one, checked the fan and the flue, even checked the overheat stat, as told by ariston

hi, it looks you haven't read my message very well, the problem is not APS but the fan keeps running even when there is no call for CH/DHW.

Hi, the problem with the above boiler is the fan keeps running even when the timer off and ho DHW being drawn then it shows code E34, some times it runs alright, but 95% shoeing that fault, over heat stat ok, APS ok, fan and flue ok, what could it be? many thanks

Yes CH works alright, sometimes there is a worm water but not hot, what do you mean diverter valve, the actuator or the valve it self?

Hi every one, I think I have posted this few days ago but I can't find it and receive no replies, so i'm posting it again, the above boiler got a problem and that no DHW, the boiler starts ok and the burner start as well but he output water is no hot at all, what could be the problem?

Hi, the above boiler not heating the water, when hot water tap on the boiler starts ok the burner ok but no hot water, only a bit worm and some times display E34 but the burner on, any idea?

Hi every one, I have got a Main BF water heater and its heat exchanger is leaking which needs to be changed, any idea where can get this? many thanks

Hi every one, I have got a compound mitre saw, I think the make is "Performance Power" and the information on it "205mm Compound Mitre Saw, Motor power 800W" I need a part for it and have no idea where to look and who is the manufacturer, any help please?

Hi all and hope you all had a nice Xmas and looking for a good new year..now the problem with the baxi 105e it starts ok in both DHW & CH but after seconds stops and the no flame LED start to flash, I noticed one thing that when the burner is on the spark does not stop, reset and the same thing...

Hi every one, can the main FF water heater be converted to LPG?