Search results

Call Drayton Tech help...they are brilliant sorted a prob i had with a digi1 stat over phone

No formal,10yrs experince (will i need to get CG 2381?)

Have been employed as a kitchen fitter for many years,now going to start out on my own,up to now all our electrical certification has been carried out by a member of our company. What will i require to install and certify my own work ,have had numerous years with kitchen associated electrical...

Best way to ensure a good straight line and curve to an ashlar wall in attic room 900mm high 3,8 mtrs long Cheers

Cheers Adam molto bene confusing eh? Sockets in bathrooms then!

Shower room 4mtrs x 3mtrs with a centre doorway all fittings to l/h side of room Shower/loo/ sink At least 3mtrs to other wall, where there is storage and a dressing table would it be acceptable to install a double gang socket under dressing table given the distance from any hazard ,and...

Cheers guys yes sky box then straight into tv. it would not light my Fluke tester.but enough to not want to keep your fingers on the cable end. So no hazard then? cheers

Asked to split main incoming aerial,to keep exsisitng location,plus a new cable to a new consevatory. When i dissconected the joiner (that already been joined at some time in past)from the main aerial (loft) to the cable comming out of the digibox,the one out of the box gave me a small...

cheers for the replys guys. yes 1mm T/E at the lamp all the cable ends were bared back it was enough of a tingle to pull the float away. went to the job today and checked junction box supplying and all seems ok. no problem now all dried out.

i was skimming a small room, the centre light cable was just poked back through the hole made in the ceiling,there was no connectors just the bare ends,when they were pushed back the switch live and neutral were touching,although no current was there as the pull cord switch was removed,and the...

have a flat roof extension approx 3mtrs wide off of side of house,cannot get a pitched roof as the first floor windows are to low . have seen flat roofs with a false tile/slate frontage ,to look like a tiled roof but only go back a small way.. What is this type of construction called? trying...

yes got sq meterage put need to check how square the roof is !

I need to fit a pre-fabricated metal roof to an outbuilding , the company will manufacture the sheets to the overall measurement.. How do i take a measurement on the squarness of the roof area, it is aprox 7mtrs by 5mtrs flat roof area would taking a reading from the diagonals be correct...

Cheers sparky for the reply,where would i seek such a course?

Hi guys, i took the 15th edition in my apprenticeship.....a good few years ago.... I am a general builder,and have been completing all my own electrical work,keeping up with current regs,up till the wonderful part p introduction. I'm becoming increasing P*****d at the restrictions...

My thoughts are a well fitted, sharp plain coving ia an asset to any room,painted in with the ceiling colour outdated nooooooooo.

Installing small led lamps.but to aid fitting i need to cut and rejoin,single outer cable with both inner cables black.whats the best method to ensure connecting correctly,before i snip!!! Cheers Jack'o

advice on scribing a tall larder cupboard to old daubed wall ...(all over the place) its a flat pack so have the panels loose,and only the l/h on show. cheers.

Whats the best way to cut external mitres when wall angle badly out of square cheers

Cheers S, tnks for yr time Jack'o