Search results

Thanks for the response the shower I am considering is the Trevi Boost Venturi. Theres more than myself in the house and the hot water is turned on when needed, also I personally dont have showers at set times so my concern is that the water won't be always hot. So thats the reason I wanted...

I'm redoing the bathroom upstairs and am thinking of having a mixer shower instead of an electric shower but the (Wikes RWB2E.cw) heating controller to turn the hot water on is downstairs in a cupboard. Can I get a Heating Controller that also has second wireless (or wired) controller that...

I'm in the process of redoing my bathroom and I would like a wall hung toilet. What I haven't been sure of is how one is able to get to the cistern when it needs servicing in the future. Can anyone shed some light on this?

What was the model and where did you get it from?

Thanks for the response, should the sashes that open that have four packers be poitioned in the corners like in this image?

Hi all, I got the window off of ebay, unused. Should I take the black tape off of the edges of the glazed units? I assume the tape is only there to aid handling and forms no sealing? How should I position the sliding black packer things in the frame? The two sashes that open each...

I'm interested in buying this PIR 180° Dual Level Standalone PIR and in the instructions the wiring diagram (page 5) shows Security load (max 1000W) on L1 and Courtesy load (max 120w) on L2. I do want to connect two lights to the PIR, both would be under 120w, so do the live of both lights...

Thanks for the reply Masona, I think I will fix some thin ply up there cut holes for Circular Soffit Vents between each 4x2, what do you think?

I'm currently building a shed/workshop out of 4x2. I plan on using 50mm kingspan type stuff in the ceiling. In the photo below you can see the gaps just below the roof/above the wall, should I cover those thin rectangular gaps completely with wood or use something that will allow some air...

^woody^ where did you get it from for that price? Its £17sqm on www.diy-flat-roof.com.

I'm currently building a posh shed and the pitched roof is only 5°. Roof area is about 26.6² Today I found a post on another forum where sombody said using an ice and watershield underneath would make it feasable to use shingles on a shallow pitch. I've been looking onto ways to cover...

I found a wickes instruction leaflet online as a pdf that says (page 11 under general informaton) Brick or blockwork openings should be a minimum of 9mm larger to allow for adjustment and square fixing in the opening. Timber stud partitions should be made to the exact size ensuring that they...

What kind of gap if any, do I need around the frames when installing a upvc window & French door into timber shed frame (4 x 2's)? I already have the second hand window and door, and I'm currently finishing the timber frame.

Can anybody recomend any shingles that would be ok for a shed roof with a slope of 5 degrees? Or do I have to use normal roof felt?

I'm going to use it to store things (not just garden tools), have an some excersise equipment in there and also a place to work on computers (troubleshooting, upgrading etc). The Wicks Breathable Membrane seems to be the best value so far. Going in order from the outside - in...

Thanks for all the replies! What about this stuff on the outside Breathable Membrane I'll be using 50mm polystyrene as insulation. I'll post up a couple of pics of the progress.