Search results

  1. P

    Back heater cover door seal on zanussi condensing drier

    Thanks for that. Have cleaned all the gunk out, what a job that was. Stuck the seal bit that had come off back on with glue. Have used drier once since with a clothes wash but leaking tended to occur with sheets or towels dry. Doing a towel wash today so will see what happens. If it still drips...
  2. P

    Back heater cover door seal on zanussi condensing drier

    I have a TC7103W Zanussi drier that is 16 yrs old and has worked ok until recently when it started dripping water. I could see at the back of the condenser unit that it was fairly gunged up so after watching utube videos I took the back heater and dust channel cover off. The panel was stuck and...
  3. P

    Ebay purchasing on tablet

    Yes I suppose it must be something to do with that. On some forums, mainly U.S ones, alot of people seem to have similar problems with Ebay payments. Thanks.
  4. P

    Ebay purchasing on tablet

    They have the bank account no saved I have never had a Paypal account, I just pay as a guest. That would not affect the problem though which is I can buy on my desktop pc but not on my tablets. Thanks for reply.
  5. P

    Ebay purchasing on tablet

    Not sure if this is software or hardware or both. I have 2 tablets, an old Android one that I keep for backup and a Fire tablet which I use alot. Up until about a year ago I used to be able to pay for Ebay items on my tablets, then they started to refuse payments. Ebay said it was Paypal at...
  6. P

    new oven electrics

    Thanks for that, it is alot clearer now.
  7. P

    new oven electrics

    I have a built in electric oven under a gas hob, both were in the house as a new build over 25 yrs ago. I may replace it soon as there have been a couple of problems with it. I do not know if it is hard wired in or plugged into a socket and the only way I can see to tell is to take out the oven...
  8. P

    1rad goes cold

    Just opening the lockshield valve fully seems to have cured it, so in a way I suppose it was a balancing problem even though I did not have to adjust any of the others. Thanks again.
  9. P

    1rad goes cold

    Ok thanks for that, I will try that and see how it goes. Thanks again
  10. P

    1rad goes cold

    I do not doubt your expertise but why should it suddenly need this after all this time?
  11. P

    1rad goes cold

    Definitely not touched any lockshield valves before this, about half an hour ago I opened the lockshield valve fully to see if any difference. Rad is barely warm while others are hotter. Does this point to an air lock? I opened the drain valve next to lockshield valve, water came out clear after...
  12. P

    1rad goes cold

    Yes but as I have not fiddled with any valves why should it suddenly start doing this after all this time? Thanks for your time.
  13. P

    1rad goes cold

    I know this problem has been asked before and I have looked at alot of replies but can I pick someones better knowledge than mine. I have open vent system which has been running fine for some years now. It had a power flush about 7 yrs ago and have not had to bleed a radiator since, before that...
  14. P

    Top connector to boiler

    Yes thanks, I was going to go for the open vent/ heat only type. Thanks for the Vaillant link.
  15. P

    Top connector to boiler

    Thanks for answers, boiler is a Glow Worm economy plus. The two connections for the water pipes on on the top of the boiler, one each side. Not sure what a stand off bracket is.
  16. P

    Top connector to boiler

    I have a 25 yr old glow worm gas boiler, it is working fine at the moment but realise it will not last forever. I was thinking of replacing it next summer and have researched alot of new boilers. One thing I have noticed is that the gas and water pipe connectors are underneath the boiler on the...
  17. P

    Shower drip strip

    Thanks, I will investigate that.
  18. P

    Shower drip strip

    Thanks for reply, I still had the paperwork somewhere which had the makers name on. I googled them but they went out of business a few yrs ago. I have googled size etc but cannot find anything. As mentioned all that comes up is strips for the bottom of glass shower doors and bath screens.
  19. P

    Shower drip strip

    We have a 25 yr old shower which is enclosed on 3 sides with an aluminium frame and hinged door. There is a ?silicone strip on the inside of the door frame at the bottom to divert water into the tray. It pushes into a slot in the aluminium frame. I take it out to clean it when the shower is...
  20. P

    Multipoint lock problem

    Thanks but I am a right muppet. Because we did not go out yesterday due to it raining all day the locks were still engaged from the night before. I unlocked the door with the key as I do every morning first thing but as I said the door was not opened, so when I turned the handle up to lock it...
Back
Top