Search results

Hi Thanks for the reply its £250 on amazon so not too bad. As attached nothing there at the moment. Is it more tricky to install then as the Mira one attached to 2 copper pipes coming out of the wall but this looks like it has to be attached to a treaded connection. Just wanted to double...

Hi I want to purchase this shower https://www.hansgrohe.co.uk/articledetail-croma-showerpipe-160-1jet-with-thermostatic-shower-mixer-27135000 Looking at the attached instructions, it doesnt look like the same kind of install that my other Mira shower was, where the pipe comes out of the wall...

Great, 18mm ply thick enough? Thanks again

Thanks, there is void behind so assume he can just drill the 2 holes and pop the pipes through.

Ok, so not flush with the front of the stud, what do they screew into then as it will be just backer board and tile? Many thanks

Hi What do people normally put behind a standard 150mm centre mixer shower to be installed on a stud wall? Do they just put a couple of noggins across or maybe be a bit of ply. Just want to get the wall ready before the plumber fits the pipes. Have attached a photo, the shower will be...

Yeah thermostatic mixers was actually looking at a bristan, are they bad then?

Hi Just after some advice on recommended shower brands and which is best. So far its between bristan, mira or aqualisa Want to get a decent one so it lasts Many thanks

Thanks, but if not that fussed about the step, is there any reason not to have the NMP under the shower? It wont cause a problem

Hi Thanks for replying, Was looking at the 6mm NMP. The floor was 18mm Chipboard but I have now replaced 90% of it with 18mm Ply. I like the idea of the NMP, its stuck down with high strength adhesive in a tube and then screwed. Where as the 6mm Aqapanel states it has to be put down with Tile...

Hi I want to board out my shower room floor with No more ply, is it ok to put this under the shower tray as well? Many thanks

Thanks, was thinking floor first and then walls down on top, thought might be better if the wall is out trying to push the floor up to it. going under a shower tray didn’t know if there is a right or wrong way or just personal preference

Hi Quick one, before the shower tray goes in I am putting no more ply on the floor and aquapanel on the walls. Which order is correct/best: No more ply down on the floor first and then aquapanel on the walls down on top of the NMP Or, walls first and then the NMP. Thinking the floor first...

Ok https://www.screwfix.com/p/spax-wirox-tx-countersunk-wirox-flooring-screw-4-5-x-60mm-300-pack/88716?tc=IT6&ds_kid=92700048793290424&ds_rl=1249413&gclid=EAIaIQobChMIttn2msq79AIVFeR3Ch0zEwVKEAQYASABEgIF7PD_BwE&gclsrc=aw.ds

Thankyou, appreciate the help/advise

Would these be any good? https://www.toolstation.com/reisser-cutter-pozi-screw/p40542

Thanks all

Hi, Quick one, what type/brand of screws are best for screwing down 18mm ply and chipboard flooring? Many thanks

Sorry one other question, see where the old shower waste goes into the stack, please could someone advise on the best item/part so I can plug/cap this hole off? thanks again

Hi thanks for the reply I have someone who will do the work just wanted to confirm that the shower tray can be fitted that way within the waste being attached from the top, is that an acceptable method.