Search results

I just bought a watwr softener from BWT but then read it has a minimum pressure requirement of 1.7bar so I would need a mains pressure pump. Do you know of any other water softeners around the £600 mark that work with 1.4 bar?

:LOL::LOL::LOL:

Is there is a standard recommend height?

How high would you install a shaver socket above the vanity unit worktop on the right?

I have been doing well with the rubi one

I have used very large format tiles on kitchen splashback, hence there are few grout lines. Could I get away using silicone here instead?

Hardiebacker have a good tech support line +44 (0) 121 311 3480

https://www.arrowvalves.co.uk/ab2-shower-break-tank This 2 litre one is a more sensible size for a bidet actually.

Thanks for pointing it out before it comes into proper use. I’ll get that tank installed in the loft. I might get away without a pump as can get it about 5m directly above.

Expensive ar$e wash in the end

I’ve done my research. I need to install this: https://www.arrowvalves.co.uk/cistern-ab-air-gap-wall-tray I’m a bit surprised at these regs because what’s the difference with doing the same thing with an ordinary shower hose except for the fact you’d get warm water.

It has a separate feed down from the loft but that is from mains. Is there a type of valve that would work in this setup, like a double check valve somewhere on the pipe?

Already got one of those. I’m a pro at siliconing cos of it.

This toilet is a pain to move and porcelain a pain to drill. Would silicone along the bottom and wall edges be enough to set this toilet?

I stacked them in the end and im happy with the result except for the grouting cock up but it’s not noticable to the average eye.

I managed to scrub all the excess with steel wool after 5 hours but the grout lines are not so professional looking but will have to make do. Mapei said I probably made an error in mixing.

No no, thats my water bucket trying to save the day. I only mixed 1/5 of the packet. I’ve got a professional grout float and sponge. It set waaay too fast. No idea wtf went wrong. Maybe I didnt put enough water. I’ll be calling Mapei tomorrow. I’m finding steel wool is working well but I might...

I tried to follow manufacturers instructions but the grout wouldn’t sponge off easily and now there is grout still stuck on all the porcelain tiles after two hours of effort scraping them off. Does anyone know a good way to remove the grout from the tiles more efficiently?

This is my first plan

its a small room