Search results

I never bother disconnecting mine, just connect the charger, then don't have to re-enter radio codes etc.

Not if there is no water in the pipe

If it does not work in diagnostics then possibly worth trying a new door lock, presuming the actuator has not snapped off the door...

If it's just a pipe that has been buried but not connected to a water supply then you will need to dig a trench across the front of the out building approx 600- 800mm deep.

https://www.ebay.co.uk/itm/267458193051

You might be able to fit another stand pipe and T into the. bottom of the waste pipe but if it works like it already is then why bother

May help

Can you fit a flue extensin and go under the extractor + 300mm

Have you checked the supply is present when switched on with a multimeter.

Knock or cut holes/ slots into the exsisting wall as you build up the extension cavity wal and build your concrete blocks and new slate into the outer skin of the slate of the old wall then reinstate the holes/slots to tie the new wall into the old one.. Do that several times as your extension...

If it covers the entire opening then just make a new backmould to suit.

WD 40?

Try nipping it up a quarter turn

The only sure way of preventing freezing is to turn off water at the main stopcock. Open all taps and leave them open. drain down central heasting boiler and any hot water and header tanks.

Download the manual here and see if thart tells you what the problem might be https://www.worcester-bosch.co.uk/professional/support/literature/worcester-si-ii-installation-instructions

https://www.ledbulbs.co.uk/products/timeguard-wi-fi-controlled-fused-spur-tuya-edition-fstwifitu?variant=39550838505530&om=13064&utm_source=google&utm_medium=cpc&utm_campaign={campaignname}&utm_term=&gad_source=1&gad_campaignid=19254995722&gclid=CjwKCAiAjc7KBhBvEiwAE2BDOVC0-O6PxF_n0JTsx7_4zDERj3Q...

You say you could use a ramp with difficulty. Would it be possible to use a longer ramp to reduce the angle and to fit a small winch ( as fitted to cars ) to pull your father up the ramp to the house or to the wheel chair itself...

Is ther a hook sticking out of the front possibly on the LHS. If so it is probably part of this as is the switch you are looking for https://www.365varaosat.fi/cooker-oven/c7gpx-si00/door-lock-assembly/product.pl?pid=2085994&shop=smeg&path=110769&refine=door&model_ref=15193486 You can see it's...

The 2 pin one in the photo appears to have locating slots and pegs so that you can only install it with the polarity being one way round.

Hopefully there will be a cnnector under the plate that will have brown blue and earth wires